User manual BUSHNELL IMAGEVIEW 11-8200(ORIGINAL VERSION WITH NO USB MASS STORAGE)

[. . . ] After the driver has been installed, you may install Roxio® PhotoSuite 5 as well, following the on-screen instructions (if you do not already have photo software you prefer to use). Connect the supplied USB cable between the ImageView and your computer, using a USB port on the computer itself (avoid USB "hubs"). Please read "Downloading Photos to Your Computer" for detailed instructions on transferring photos to a PC using PhotoSuite. Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please read these instructions and take time to familiarize yourelf with the different parts and features of the product. [. . . ] If no button is pressed for 5 seconds, the camera returns to stand-by. "Delete All" is a quick way to clear the memory following a download of your photos to a computer, so that the camera is ready to hold as many new photos as possible. OTHER DISPLAY ICONS · Battery Indicator ( ) : Shows the amount of battery life left. When only one third of the icon is filled in, you should plan to replace the batteries soon. Be sure to bring an extra set of batteries on a long trip or for important events. WARNING: Make sure you download all photos (see directions below) from the camera before removing or changing the batteries. The camera memory is battery dependant, and your photos will be lost if you take the batteries out, or if the batteries are allowed to become completely dead. · PC Connection (PC) : When the camera is connected to your PC via the supplied USB cable, the "PC" icon is displayed. Note: when the camera is connected to a PC, the camera will power on automatically, and uses the USB connection for power to conserve battery life while downloading photos. 4 USING THE IMAGEVIEW WITH YOUR COMPUTER System Requirements: Pentium 166MMX or equivalent minimum (Recommended Pentium II 266) Windows 98/ME/2000/XP Minimum 32MB of RAM USB Port (do not connect the camera through a USB hub) Minimum 200 MB of hard drive space, with additional 65MB for IE and Direct X CD-ROM driver Super VGA monitor and video card SOFTWARE INSTALLATION DO NOT CONNECT THE IMAGEVIEW CAMERA TO THE COMPUTER BEFORE INSTALLING THE DRIVER SOFTWARE To load software, insert the supplied CD into your CD-ROM drive and it will self-start. If your computer does not have an auto play function and does not automatically launch the CD install screen, open the CD (open "My Computer" and double click the "ImageView" CD icon) and click "Install Driver". The CD contains the PhotoSuite software, as well as the drivers that will allow your computer to recognize your camera. Even if you have photo-imaging software on your computer and do not need the PhotoSuite software, you will still need to install the drivers for the camera. 5 Follow the on screen instructions. After drivers are successfully installed first, return to the CD install screen, and click on "Roxio PhotoSuite 5" to install the photo imaging software. If you have questions about using your ImageView, including the downloading process, help is available at www. bushnell. For PhotoSuite software technical support, go to the Roxio website at: www. roxio. com and click "Support", then select your PhotoSuite version and search the online knowledge base. Note that PhotoSuite has an extensive Help menu, so be sure to reference that first. You may have a brief wait for the process as Windows "builds a driver information database" and confirms that the PC matches the correct software to the attached hardware device. Open the program PhotoSuite 5 Click "Transfer" in the left frame area under "Home Page" Select "Transfer from new device" Under (#1) "Select a device from the list", click "DaulCamera", then click "Next" at the bottom of the left frame area. You may now name the group of photos if you wish (#2), or accept the default "Captured (current date). Note that your photos will also be added to your hard drive in a folder of the same name, located in C:/My Documents/My Pictures. Click on the "Download photos" button (pink camera round icon on bottom left) to start the download from the ImageView to your computer. When the download is finished, you should see "thumbnail" preview frames showing your photos in the driver window. [. . . ] 3) Connect the camera to your PC with the supplied USB cable, then click the red "camera" icon in the bottom left area of the driver window to download your movie file. You will see a progress bar as the movie downloads, and the camera will beep when the download is complete. 4) Click the AVI frame you want to select it, or use the "Select All" icon in the driver window (4th from left). Then click the "computer disc" icon in the center of the driver window to give the movie a name and save it to your desktop or hard drive. [. . . ]