User manual BUSHNELL IMAGEVIEW 11-1211

[. . . ] A card icon is seen in the top right of the display when the camera is turned on, if a card is inserted 3. The "live preview" display will come on a second or two later. The camera will turn off automatically after about one minute if no buttons are pressed. Note: when the camera is connected to a computer via a USB cable, the camera will turn on automatically, and draw power from the computer with no battery drain. [. . . ] Clicking on the new disc icon will show the contents, a folder named "DCIM. " The image folder inside this contains your photos, stored as JPEGs (. jpg file format). They may then be viewed, edited, renamed and saved using any photo or graphics software that accepts . jpg files. If you do not have software that will open . jpg files, you should install Roxio Photosuite 5 (Windows 98, 2000 or XP only) from the included CD-ROM. After you have copied or opened and saved the photo files to your computers hard drive, you may disconnect the Imageview camera (NEVER disconnect the camera while files are still being transferred to your computer. ) Before disconnecting, you should "eject" or stop the "removable disc" representing the camera to avoid an error message (not necessary with Windows XP). See the following pages for full step by step instructions for downloading your photos to a computer. 10 ImageView 111211 1LIM draft. indd10 10 3/12/07 4:01:04 PM System Requirements (Minimum) OS: Windows® 98/98SE/2000/ME/XP/Vista (PhotoSuite 5 is not compatible with Vista) CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5TM) Memory: 32MB minimum (64MB recommended for PhotoSuite) SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color 200 MB available hard disk space (if installing PhotoSuite) Internal USB Port Software Installation If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM into your computer's CD drive; it will auto-run and the install screen will be displayed. Windows 2000, ME, and XP do not require drivers, as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may install Roxio PhotoSuite® from the CD-ROM. If so, check the box that adds an icon to your system tray or taskbar. Then next time you finish transferring photos, you can click that icon first, and "Stop the USB Mass Storage Device" before disconnecting the camera. (On Mac computers, you should "eject" the "disk" that appeared on your desktop when the camera was connected. ) 1 ImageView 111211 1LIM draft. indd12 12 3/12/07 4:01:05 PM Transferring The Photos & Videos to Your PC continued 7. You're now ready to open the photo files in any photo editing software. Just use File>Open and go to the folder where you stored the photos earlier. If you are using PhotoSuite, select File>Open Photo, then use the "Look in" pull down menu at the top of the Open window, select "My Computer", select your hard drive, and double click any photo in the folder where you copied the files from the camera. It is also possible to open and work with your photos directly from the ImageView while it is still connected. To do this with PhotoSuite, first follow steps 1-3, then open PhotoSuite, select File>Open Photo and use the "Look in" menu to select My Computer, then select the "Removable Disk", and open the folders inside until you get to the JPG photo files. If you choose to work this way, from a connected camera, be sure that you save the photo (when you are done editing) to your hard drive, and not the camera's memory or card. To do this in PhotoSuite, after clicking "Done", answer "Save Changes?" with "Yes", but then answer "Replace Existing File"?with "No" and use the "Save As" dialog box to save the edited photo in a folder on your hard drive ("Save In>Local Disk"), not the "Removable Disk" (camera). If you are new to photo editing on a computer, consult your software's Help menu (PhotoSuite has extensive built-in Help) for tips on using its features. Along with adjusting the brightness, contrast, sharpness and color of your photos, you can resize the photo to fit the paper if you are printing, or save a smaller, low or medium resolution version for email or inserting into documents. When you are ready to save your edited file, you may want to use "Save As" and give it a more descriptive name than "IMG___". Doing this also preserves the original file as a backup to reopen and re-edit later. [. . . ] Send To: IN CANADA Send To: following measures: Bushnell Outdoor Products Bushnell Performance Optics · Reorient or relocate the receiving antenna. Attn. : Repairs Attn. : Repairs · Increase the separation between the equipment and receiver. 8500 Marshall Drive 25A East Pearce Street, Unit 1 · Connect the equipment into an outlet on a circuit Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9 different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV For products purchased outside the United States or Canada please contact your local dealer for applicable technician for help. Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. [. . . ]