User manual BUSHNELL 260332

[. . . ] The Digital Color Night Vision also contains an RCA video output port which allows live transmission to video camcorders, computer lap tops / monitors, and television screens. hoW DIGItal nIGHt VIsIon WorKs Bushnell Digital Night Vision products collect existing light through the objective lens. The light is then processed through a highly sensitive CMOS sensor and transferred to the micro liquid crystal display (color LCD). The Bushnell Digital Color Night Vision unit is ideal for camping, caving, scouting, maritime navigation, and observing wildlife under the veil of darkness, patrolling warehouses and similar surveillance operations where light is scarce. [. . . ] At this point, the display focus (eyepiece ring) is set for your individual eyesight and will not require further adjustment when viewing objects at different distances. When changing the viewing distance, simply rotate the main focus wheel (6) until the image is in focus. The Digital Night Vision has a light level sensor on the front of the unit (14) which detects low light conditions and automatically turns on an infrared illuminator (7) to improve image quality. When the IR light is on, this is indicated by the red LED (9) above the power indicator. You can also turn the IR illuminator on manually anytime, even if ambient light levels are high, by pressing and holding the IR switch (8) for a at least two seconds (when you release the switch, you will see the red IR illuminator LED indicator, confirming the IR illuminator is on now). to decrease the brightness of the IR illuminator , press the "-" key. This can be helpful in improving the LCD display viewing quality (by avoiding "wash out") in very low light conditions or complete darkness. While moving from viewing one object to another object, it might be necessary to rotate the objective lens focus wheel and adjust the IR illuminator brightness in order to achieve the best image quality. When the Digital Color Night Vision is connected to compatible video equipment, the image produced by the unit can be monitored and/or recorded. Note: Model 260332 is compatible with the NTSC video system used in the US and Canada. Model 260333 is compatible with the PAL video system used in many other countries. To connect the Digital Night Vision to a household outlet, use the included 6 volt AC power adapter. Note that this feature is not intended to recharge AA batteries of any type, and should not be used for that purpose. NotE: When the batteries are inserted and the external power source is turned on, the device operates on the external power source. If you unplug the external power source, and you want to use the battery source, you have to press the ON button (3) to make the device operate. notE: A standard tripod mounting socket is provided on the bottom of the unit. Remove the round rubber plug near the center of the bottom face of the unit and set it aside. If the batteries are installed correctly and the batteries are good, then the greenLED indicator light should be on steadily. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]