User manual BUFFALO WZR-RS-G54

[. . . ] User Manual 125* High Speed Mode Wireless Secure Remote Router WZR-RS-G54 Rev B www. buffalotech. com Table of Contents Introduction . 106 4 Introduction AirStation 125 High Speed Mode Wireless Cable/DSL Router (WZR-RS-G54) This manual introduces you to the AirStation Cable/DSL Router, and will help you connect to your network quickly. The WZR-RS-G54 router, is a wireless 4-port router network device that complies with the 2. 4GHz IEEE 802. 11g standard specification on wireless LANs. The WZR-RS-G54 supports enhanced built-in NAT/SPI firewall functions and is used as a multi-functional router/link between wired and wireless LAN computers. [. . . ] · Rejected - Return the rejected packet to the point of origin. Warning: If administrator selects packet from LAN is Ignored or Rejected, the administrator will 56 Advanced Settings no longer have access to the AirStation configuration screens. The AirStation can be returned to the factory default settings by holding down the INIT button on the back of the unit for five seconds or until the red DIAG light becomes solid. Select from all protocols, ICMP, arbitrary protocol number and TCP/UDP protocol number. · TCP/UDP Destination Port - Select TCP or UDP, then enter port number. The smaller the number, the higher the priority. Add MAC Filter setting MAC Filter - Click Enter MAC filter to enter MAC address. Source MAC address -The MAC address of the source of the packets that will be filtered may be set. Click Add rule when complete. 57 Advanced Settings Note: If configuring from a wireless computer, add your MAC address to the list of authorized wireless LAN PCs. Example: 00:40:26:00:11:22 Click Apply when settings are complete. 58 Advanced Settings Intrusion Detector Setup Intrusion Detector The Intrusion Detector watch guards and prevents unauthorized access from the WAN (Internet) This function also records information on unauthorized access attempts Intrusion Detector - Select Do not use, Use or Use (Apply Packet filter setting for Intrusion Detector setting). Threshold Value - Enter the number (1-999) of suspect packets before the notification occurs. Notify by email · Notification email address - Enter destination email address · Sender email address - Enter the email address that will send the email. This is the name that will appear as the sender when the email is read. DETECTOR@AIRSTATION 59 · Sender email server address - Enter the SMTP Server address. · Receiving email server authorization - Enter the POP3 Server address, User name and Password. This is only required if your SMTP server requires POP verification before it allows email to be sent. · Send test - Click Send to test notification; this will also save and commit the entries. Client Manager must be installed and running on a client machine to use this feature. · Destination IP address - Enter the IP address to be notified. The LAN computer with this IP address must have Buffalo's Client Manager software installed and running for the verification to occur. If the machine is off the verification will not be received, and the AirStation will NOT resend information. Intrusion Detector information - displays log activity detected by the Intrusion Detector service. 60 Advanced Settings UPnP Setting UPnP Select Enable to enable UPnP (Universal Plug and Play). When a computer with UPnP support connects to the AirStation, that computer automatically receives configuration information from the AirStation. 61 Advanced Settings System Information Management - System Information System information of the AirStation is obtained here. · Model name - Displays model and firmware version · AirStation Name - Displays AirStation host name · DHCP Server function - Displays On or Off · Wireless - Displays the wireless LAN settings such as wireless MAC address and wireless firmware. [. . . ] This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. BUFFALO declared that WZR-RS-G54 is limited in CH1~11 by specified firmware controlled in USA. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. 102 FCC / CE Information Important Notice: This device is a 2. 4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states. [. . . ]