User manual BUFFALO WLI-USB-G54 QUICK SETUP

[. . . ] System Requirements Desktop or Notebook PC with an available USB port 10 MB of available disk space 802. 11b or 802. 11g access point (Infrastructure Mode) OR a different computer with an 802. 11b or 802. 11g wireless adapter (Ad-hoc Mode). 1 USBG54 QSG final. indd 1 Depending on your operating system, methods of preparing your computer for installation will vary. Please ensure that the installation procedures being used are for your operating system. Please visit us online for the latest User Manuals, software and drivers at: www. buffalotech. com/wireless PY00-29006-DM20 9/22/03, 10:08 PM System Requirements by Operating System This is a high-speed USB 2. 0 product. For Windows XP and Windows 2000 users it may be necessary to update and patch your operating system to take full advantage of the speed of USB 2. 0 as follows. [. . . ] Restart your computer if prompted. Windows XP users have the option of using Windows' built-in Wireless Zero Configuration service to manage the wireless card or Client Manager from Buffalo Technology, which is included on the CD. If Client Manager is used, the Wireless Zero Configuration service should be disabled by entering the Contol Panel - Administrative Tools - Services and changing the WZC service state to disabled. An update for Wireless Zero Configuration is available from Microsoft that will support enhanced security. Check microsoft. com for this free update. 4 USBG54 QSG final. indd 4 9/22/03, 10:08 PM If Wireless Zero Configuration Service is not functioning, select Start » Control Panel » Administrative Tools » Services. Select Automatic in the Startup type field to enable Wireless Zero Configuration Service. The default value of Wireless Zero Configuration Service is Automatic. You have finished installing your Wireless USB Adapter-g. See Installing Client Manager to install Client Manager on your computer. Client Manager will not function properly if the Wireless Zero Configuration Service is activated. For more information about configuring and operating your Wireless USB Adapter and Client Manager, refer to the Buffalo Support Web Site. Note: Buffalo Technology recommends that users of the Wireless Zero Configuration Service upgrade to the latest version freely available at www. microsoft. com. 5 USBG54 QSG final. indd 5 9/22/03, 10:08 PM Windows 2000 Installation & Configuration Step Installing the Wireless USB Adapter-g Insert the Wireless USB Adapter, cable into an available USB port. Once the Wireless USB Adapter is installed correctly, the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove the Wireless USB Adapter and restart the computer. Click the Next button to continue. Verify that the Specify Location checkbox is selected under Optional search locations. Click the Next button to continue. 6 USBG54 QSG final. indd 6 9/22/03, 10:08 PM The setup process will locate the suitable driver on the CD. Click Next to proceed with installation. If the Digital Signature Not Found window opens, informing you that no digital signature exists for the driver you are installing, click the Yes button to continue the installation process. When the Wireless USB Adapter driver is successfully installed, click the Finish button. You have finished installing your AirStation 54Mbps Wireless USB Adapter-g. See Installing Client Manager to install Client Manager on your computer to complete the setup process. 7 USBG54 QSG final. indd 7 9/22/03, 10:08 PM Windows 98SE/ME Installation & Configuration Depending on the operating system used, some windows may appear slightly different. After attaching the USB adapter, the Add New Hardware Wizard will launch. Allow the wizard to search for the best driver and click Next. Check the box for the CD-ROM drive and clear any boxes already checked. [. . . ] www. buffalotech. com/wireless help@buffalotech. com 866-752-6210 (USA & Canada only) The constantly evolving state of wireless products and operating systems requires Buffalo Technology to occasionally release updated software to take advantage of new technologies and to comply with industry standards. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo Technology website. FCC Compliance Statement - See owners manual for complete statement. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. R&TTE Compliance Statement - See owners manual for complete statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). Copyright © 2003 Buffalo Technology, Inc. [. . . ]