User manual BUFFALO WLI-TX1-G54 QUICK SETUP

[. . . ] ® Quick Setup Guide 54Mbps Wireless Ethernet Converter-g WLI-TX1-G54 Use this guide to quickly and easily install your Wireless Ethernet Converter-g. For detailed information, refer to the User Manual on the Utility CD or refer to the Buffalo Wireless Support Web Pages. [. . . ] Set Connect via to Built-in Ethernet Set Configure to Manually Enter 1. 1. 1. 2 into the IP Address field. Close and Save. 3 Step Connecting the Wireless Ethernet Converter to the AirStation. Open your Web browser 4. 5 or later and enter 1. 1. 1. 1 into the URL field. The login screen will open. Click OK The main configuration screen of the 54Mbps Ethernet Converter will open. Click Search in the ESS-ID (SSID) field. 4 The Ethernet Converter will scan for available wireless networks. Select the SSID (ESS-ID) of the AirStation or other Wi-Fi access point to associate with and click select. If encryption is used, select the Encrypt button and select ASCII or HEX and enter the WEP password. Click Set to Connect. The Ethernet Converter is now associated with the Local Area Network. All settings will be retained by the Ethernet Converter when moved between different computers and peripherals. Some screens may vary from those shown in this guide, depending on the operating system used. By accepting the default configuration settings, the Ethernet Converter Manager should discover and configure properly. For more information about configuring and operating your Wireless Ethernet Converter, refer to the User Manual on the Utility CD or the Buffalo Support Web Site: http://www. buffalotech. com/wireless/support. 5 Windows Step Reset the TCP/IP settings of your computer Open your network properties. All settings will be retained by the Wireless Ethernet Converter when connected to other devices. 6 Macintosh OSX - Open your System Preferences and select Network. Set Show to Built-in Ethernet Set Configure to Using DHCP Click Apply Now. OS9 - Open your Control Panels and select TCP/IP. [. . . ] R&TTE Compliance Statement - See owners manual for complete statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). Copyright © 2003 Buffalo Technology, Inc. Buffalo Technology (USA) Inc. , is part of MELCO INC. , the global manufacturers of IT peripherals, including memory, networking, and multimedia products, inside many of the world's computers. [. . . ]