User manual BUFFALO WLI-CB-B11 QUICK SETUP

[. . . ] exe in the Open field, where D: represents the letter assigned to the CD-ROM drive. If another letter is assigned to the CDROM drive, your command should reflect that difference. Click the OK button to begin the installation process. Review the Software License Agreement. Click the Yes button to confirm your agreement with the terms and continue installing the Wireless Notebook Adapter drivers. [. . . ] One or more wireless networks are available appears as a caption accompanying the icon. Note: If the Wireless Zero Configuration Service is not functioning, select Start » Control Panel » Administrative » Tools » Services. Select Automatic in the Startup type field to enable the Wireless Zero Configuration Service. The default value is Automatic. Right click the networking icon in the taskbar and select View Available Wireless Networks to display a list of available wireless networks. See the next step if you need to enter an SSID network name or WEP/WPA encryption key. Select an access point network name or SSID and click the Connect button to establish a connection. 5 Select a network name or access point and click the Advanced button to enter an SSID network name or WEP key if necessary. For more information about the Wireless Zero Configuration Service, refer to the AirStation Wireless Adapter's User Manual. You have finished installing your Wireless Notebook Adapter-B. See Installing Client Manager to install Client Manager on your notebook. Client Manager will not function properly if the Wireless Zero Configuration Service is activated. For more information about configuring and operating your Wireless Notebook Adapter-B and Client Manager, refer to the AirStation Wireless Notebook Adapter-B Help, located on the Air Navigator CD. Note: Buffalo Technology recommends that users of the Wireless Zero Configuration Service upgrade to the latest version freely available at http://www. microsoft. com Skip to Page 9 if you are not using Windows XP or prefer not to use Windows XP's Wireless Zero Configuration Server. It is recommended to use Wireless Zero Configuration if available. 6 Windows 98/ME/2000 Installation & Configuration Step 2 Installing the Wireless Notebook Adapter -B Insert the Wireless Notebook Adapter, with the Buffalo logo facing up, into an available CardBus slot. CardBus slots are usually located on the left or right side of the notebook. Once the Wireless Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Reinsert the Wireless Notebook Adapter once the notebook has rebooted into windows. . Select Search for a suitable driver for my device. Click the Next button to continue to the Locate Driver Files page. 7 Verify that no Optional search locations are selected. Click the Next button to continue to the Driver Files Search Results page. Windows will display a driver you can use with the Wireless Notebook Adapter. Click the Next button to continue the installation process. Windows 2000: If the Digital Signature Not Found page opens, informing you that no digital signature exists for the driver you are installing, click the Yes button to continue the installation process. When the Wireless Notebook Adapter is successfully installed, click the Finish button. See Installing Client Manager to install Client Manager on your notebook. [. . . ] www. buffalotech. com/wireless info@buffalotech. com 866-752-6210 (USA & Canada only) The constantly evolving state of wireless products and operating systems requires Buffalo Technology to occasionally release updated software to take advantage of new technologies and to comply with industry standards. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo Technology website. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. R&TTE Compliance Statement - See owners manual for complete statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/ EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). *11 Mbps is the IEEE 802. 11g standard theoretical maximum data transfer rate. [. . . ]