User manual BUFFALO LPV3-U2

[. . . ] When the installation is complete, press the `Finish' button. Congratulations, the software has been successfully installed. 3 Using the Software Launch the software by finding the icon in the Start Menu. Press the `Start' button, select `Programs', select `BUFFALO', select `LPV3 Manager', and finally press the `LPV3 Manager' icon. The LPV3 Manager will launch and search for the USB Print Server on the network. The LPV3 Manager will display the USB Print Servers on the network. 4 Configure the USB Print Server by double-clicking on the corresponding Print Server. This will open the USB Print Server's properties. The name of the USB Print Server can be changed by entering a new name in the `Server Name' field. [. . . ] Press the `Next' button when finished. A summary screen will appear. Press the `Finish' button to continue setting up your USB Network Printer. Please select the proper printer from the list below, or refer to the printer manufacturer's driver location. Once the proper printer driver has been selected, press the `Next' button. NOTE: Press the `Have Disk' button to install drivers from a CD-ROM or Floppy disk. 11 The `Name Your Printer' window will appear. Enter an appropriate name or leave the default `Printer name' if desired. Press the `Next' button when complete. The `Printer Sharing' window will appear. Select `Do not share this printer' and click the `Next' button. Press the `Next' button when finished. The `Add Print Wizard' is now complete. Congratulations, your USB Network Printer has been installed. 12 Windows 98 & ME Open the `Printers' folder. To do so, open the `Control Panel' and then open the `Printers' folder. Select `Network printer' and press the `Next' button. A prompt for the `Network path or queue name' will appear. Press the `Browse' button. NOTE: You can enter the printer's path if you wish. The format should be \\PrintServer\PortName (where PrintServer and PortName are the same as set on Page 5. Press the `Next' button when finished. 13 The `Browse' dialog window will appear. Browse for the appropriate printer, select it, and press the `OK' button. NOTE: If an error is displayed while browsing for the printer, then there is a network problem, or a problem with the `PortName' set on Page 5. To remedy the problem, reset the Print Server to factory defaults by following the instructions on Page 8. If you still have problems, contact our 24/7 customer support at 1-(866) 752-6210. Select the correct driver from the supplied list, or press the `Have Disk' button to select a driver supplied by the printer manufacturer. Once the proper driver has been selected, press the `Next' button. 14 The `Printer Name' window will appear. Enter an appropriate name for the printer and press the `Finish' button. The USB Network Printer is now installed. Find the printer in the Printer's folder, right click on its icon and select `Properties'. The `Printer Properties' window will appear. If the test page prints, then your printer is setup properly. 15 Internet Printing Protocol (IPP) Internet Printing Protocol (IPP) allows a computer in a remote location to print to an installed printer at a home or office over the internet. [. . . ] Open the `System Preferences' from the Apple menu and select `Network'. Press the `Apply Now' button when finished. Open a Web Browser (Version 4. 5 or later) and enter 192. 168. 11. 222 into the `Address' field. Press the Enter or Return key to continue. The `Server Status' page of the USB Print Server will open. Press the `Settings' link to continue setting the Print Server up. 19 The Basic Settings menu will appear. [. . . ]