User manual BUFFALO HD-HGLAN : LINKSTATION GIGABIT QSG

[. . . ] If the LINK/ACT light is still not lit, please verify the following: Both LinkStation and the hub, switch, or PC are powered on. The Ethernet Cable is securely fastened to both devices. 3 Link Navigator Setup The setup of Link Navigator is performed using the following steps: Insert the LinkNavigator CD into the PC's CD-ROM drive. Depending on the PC's configuration, the EasySetup program may launch. [. . . ] Refer to the User Manual for detailed explanations of each menu and their settings. Please not that Pcast media server option can only be used in conjunction with a Buffalo LinkTheater. Then click on the `LinkStation Name Setup' link. 5 LinkStation Configuration The LinkStation name will be required to access LinkStation. Feel free to use your first or last name, a description of the data to be installed on LinkStation, or simply name it LinkStation. Enter a short description of LinkStation in the `LinkStation Description' field. If you would like to create additional shares for specific users or specific types of data, then click on the `Security' tab. From this configuration page you can add new shares or edit existing shares. Press the `Add a New Folder' button to begin creating a new shared folder. To begin setting up a new share, enter an appropriate share/folder name in the `Shared Folder Name' field. Enter a description of the share in the `Shared Folder Description' field. It is recommended to leave the remaining settings in their default state. Please refer to the User Manual on the LinkNavigator CD-ROM before changing any of these settings. Please repeat this step to create additional shares. 6 Accessing LinkStation Data from a PC Accessing LinkStation data is performed using the following steps: Press the `Start' menu, select the `Run. . . ' option. When the `Run' dialog appears, please type \\LinkStation_Name (where LinkStation_Name is the `LinkStation Name' set on Page 6). To setup security and password protection, please refer to the User Manual on the LinkNavigator CD-ROM. A drive letter can also be mapped for LinkStation, see the next step for more information. From the previous step's `Root Directory' screen, use the pull down menu and click `Tools' and then select `Map Network Drive'. Select the drive letter you would like LinkStation to assume from the `Drive:' pull down menu. Enter the \\LinkStation_Name\share_ name in the `Folder:' field (where LinkStation_Name is the `LinkStation Name' and share_name is the `Shared Folder Name' both set on Page 6). [. . . ] All expressed and implied warranties for the Buffalo product line including, but not limited to, the warranties of merchantability and fitness for a particular purpose, are limited in duration to the above period. Under no circumstances shall Buffalo Technology be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, the Buffalo products. Buffalo Technology reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. [. . . ]