User manual BRUNTON PED1204

[. . . ] Energizer® and e2® are registered trademarks of Energizer Holdings, Inc. Points of Interest Data in this unit are by infoUSA, copyright © 2001-2004, All Rights Reserved. infoUSA is a trademark of infoUSA, Inc. eXitSource Database, copyright © 2001-2003 Zenrin Co. Ltd. Brunton may find it necessary to change or end our policies, regulations and special offers at any time. [. . . ] If no MMC is present, you must first insert a card into Atlas in order to activate the Load or Save commands. To transfer data from Atlas to the MMC: press ENT (for SAVE. ) To transfer data from the MMC to Atlas: press to LOAD|ENT. 39 3. Saving: To accept the default name "Data" for the GPS Data File, press to SAVE|ENT. If you wish to rename the file (as in the example below), press ENT to activate the selection box. Press or to change the first character, then press to the next character and repeat until the name is correct. The unit will display first a progress then a completion message when the data transfer is finished. To return to the Page view, press EXIT|EXIT. From left to right, these figures show the menu sequence for naming and saving a GPS Data File from an MMC into Atlas's memory. 4. Loading: There may be more than one GPS Data File (*. USR) on the card. To select a file, press ENT to activate the selection box, use or to highlight the file, then press ENT to accept the selection. The unit will display a completion message when the data transfer is finished. To return to the Page view, press EXIT|EXIT. From left to right, these figures show the menu sequence for loading a GPS Data File from an MMC into Atlas's memory. 40 Switch to Advanced Mode To leave Easy Mode and switch to Advanced Mode: 1. This page shows you the quality and accuracy of the current satellite lock-on and position calculation. WARNING: Do not begin navigating with this unit until the numbers have stopped flashing!2, Easy Mode Operation, for further explanation and more illustrations of the Satellite Page. To get to the Satellite Status Page: press PAGE repeatedly until the page you want appears. To get to Satellite Status Menu: press MENU. Satellite Status Page, left, Satellite Status Menu, right. Status Menu The Satellite Status Menu allows you to set your own GPS options such as track smoothing, and whether you want the GPS engine to stop searching (a power-saving function for use indoors). Position Page This page provides detailed information on your Barometric pressure or altitude. It also shows graphically the last 24 hours of Barometric or Altitude History. It also displays your Current, Minimum, Maximum, and Average Barometer or Altitude. In addition you can also display your altitude, travel time, speed, and other useful information about your position and trip. To get to Position Page: press PAGE repeatedly until the page you want appears. 44 You now have a choice to display Altimeter or Barometer History. Each will display a graph of the past 24 hours history of Barometer or Altitude. [. . . ] "You" or "your" refers to the first person who purchases this product as a consumer item for personal, family or household use. We warrant this product against defects or malfunctions in materials and workmanship, and against failure to conform to this product's written specifications, all for two (2) years from the date of original purchase by you. WE MAKE NO OTHER EXPRESS WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING THIS PRODUCT. Your remedies under this warranty will be available so long as you can show in a reasonable manner that any defect or malfunction in materials or workmanship, or any non-conformity with the product's written specifications, occurred within two years from the date of your original purchase, which must be substantiated by a dated sales receipt or sales slip. [. . . ]