User manual BRITAX KIDFIX

[. . . ] Use the RÖMER KIDFIX exclusively for securing your child in your vehicle. If you secure your child in the child seat with only a 2-point belt, then in the event of an accident this may cause serious injuries to your child, possibly resulting in death. The RÖMER KIDFIX is approved for two different methods of installation: with the KIDFIX locking arms 15 into the ISOFIX fastening points in the vehicle (semi-universal). 1 with the KIDFIX locking arms into the ISOFIX fastening points in the vehicle (semi-universal) The additional fastening system with the KIDFIX locking arms is based on semi-universal approval. [. . . ] Do not incline the backrest 2 beyond the point indicated by the spacer bracket 9. The RÖMER KIDFIX can be installed in the vehicle in two different ways. For the protection of all vehicle occupants In the case of an emergency stop or an accident unsecured persons or objects may cause injury to other vehicle occupants. The child safety seat is always secured when it is in the vehicle, even if no child is being transported. to protect your vehicle · Some vehicle seat covers of sensitive materials (e. This can be avoided by placing a blanket or towel under the child seat. 1 Fastening with the KIDFIX locking arms the RÖMER KIDFIX is installed permanently in the vehicle with the KIDFIX locking arms. Your child is then buckled into the child seat with the vehicle's 3-point seatbelt. Clip the two insert guides 16*, recess facing upwards, to the two ISOFIX fastening points 20. The ISOFIX fastening points 20 are located between the surface and the backrest of the vehicle seat. * The insert guides make it easier to install the seat using ISOFIX and prevent the seat cover from becoming damaged. If your vehicle has folding backrests, remove the insert guides before folding them down. Push the green safety button 22 and the red release button 23 on both KIDFIX locking arms 15 towards each other. This ensures that both hooks on the KIDFIX locking arms 15 are open and ready to use. Push both KIDFIX locking arms 15 into the insert guides 16, until the KIDFIX locking arms 15 engage on both sides. Push the seat cushion 1 to the rear against the backrest of the vehicle seat (see 3. 2 Removal with KIDFIX locking arms Pull the adjusting lever 21 upwards and pull the seat cushion 1 all the way forward. Push the green safety button 22 and the red release button 23 on both locking arms 15 towards each other. Pull the adjusting lever 21 upwards and push the KIDFIX locking arms 15 all the way into the seat cushion 1. 3 Making sure that the child seat with the KIDFIX locking arms is installed correctly For the safety of your child, please check that. The seat cushion is engaged on both sides with the KIDFIX locking arms 15 into the ISOFIX fastening points 20 and that both green safety buttons 22 are visible, It is simply secured together with your child using the vehicle's 3-point seatbelt. Make sure that the backrest 2 lies flat against the backrest of the vehicle seat (see 3. [. . . ] Fabrics: All our materials meet very high requirements with regard to colour fastness when exposed to UV radiation. This is not a material defect, but rather a normal sign of wear which is not covered by the warranty. Buckle: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. when processing claims , product-specific depreciation rates will be applied. [. . . ]