User manual BRITAX KID PLUS

[. . . ] Should your child be secured in the vehicle seat with only a 2-point belt, he or she could sustain serious injuries possibly resulting in death. In a van or minibus) only if the vehicle seat is also approved for use by adults. 2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on belt with an "E" or "e" in a circle). 3) If there is a front airbag: slide back all the way or nearly so, observe any instructions in vehicle owner's manual. [. . . ] Now press both adjustment buttons 16 again and adjust the side parts 15 to the desired width. 3 Adjusting the height of the headrest A properly adjusted headrest 3 ensures the optimum distribution of the diagonal belt section 6 and provides your child with the desired protection and comfort. € The headrest 3 must be adjusted in such a way that you can still pass two fingers between the your child's shoulders and the headrest 3. To adjust the height of the headrest 3 to fit your child: Grasp the adjustment handle 8 by the back of the headrest 3 and pull it upwards slightly. As soon as you have let go of the adjustment handle 8, the headrest will engage. 4 Reclining position of the backrest The backrest 2 of the child seat adapts smoothly to the slant of the vehicle seat. Please observe: The best possible protection can only be ensured if the vehicle seat is in its upright position. The backrest 2 of the child seat can be inclined backwards into a reclining position independent of the the vehicle seat. To do so, fold out the displacement angle 9 on the back of the backrest 2. Now incline the backrest 2 backwards until the displacement angle 9 lies flat along the back of the vehicle seat. Do not incline the backrest 2 farther than specified by the displacement angle 9. 5 Securing your child The KID plus does not require installation in the vehicle. Fastening the vehicle seat belt Place the child seat on the vehicle seat. Please be sure that the backrest 2 lies flat along the back of the vehicle seat (see 3. If the headrest of the vehicle seat is bothersome, simply turn it around. Pull out the vehicle seat belt and guide it in front of your child to the vehicle seat buckle 10. Inserting the vehicle seat belt into the red belt guides of the child seat. Insert the diagonal belt section 6 and the lap belt section 11 on the side of vehicle belt buckle 10 under the armrest into the light red belt guide 12 of the seat cushion 1. The vehicle seat beat 10 may not rest between the light red belt guide 12 and the armrest . Insert the lap belt section 11 on the other side of the seat cushion 1 into the light red belt guide 12 as well. The lap belt section 11 must lie as low as possible over your child's hips. Guide the diagonal seat belt section 6 into the dark red belt holder 7 of the headrest 3 until it lies completely in the belt holder and is not twisted 7. [. . . ] This is not a material defect, but rather a normal sign of wear which is not covered by the warranty. Buckle: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. Please contact your retailer directly in the event of a warranty claim. when processing claims , product-specific depreciation rates will be applied. [. . . ]