User manual BRITAX ESPRIT

[. . . ] · Only use accessories and replacement parts approved by Britax Child Safety. · Read and understand these instructions before using this product. To ensure proper use, store this user guide in a convenient place so it can be consulted often. Failure to follow all warnings and instructions could result in serious injury or death. 2 3 Assembly Initial Assembly Unfold Operating Instructions A 1 Locate dual front wheels (2x) and hood (fig. [. . . ] To Release Parking Brake 1 Locate brake lever between each set of rear dual wheels. F). Swivel Wheels C 5 Place stroller on side with handle facing upward. 6 Squeeze frame together while attaching frame lock arm to frame lock knob (fig. C). 6 D 7 Use built-in handle for easy transport. G To allow front wheels to swivel, press swivel lever down (fig. G). H To prevent front wheels from swiveling, turn wheels forward, then lift swivel lever up until engaged with notch (fig. H). 7 Operating Instructions Backrest Hood (cont. ) Operating Instructions A To lower backrest, pull backrest adjuster out, to desired position (fig. A). B To raise backrest, hold backrest adjuster cords, while pushing backrest adjuster in, to desired position (fig. E). Hood 1 2 C 3 F G To Attach Hood 1 press attachment clips onto each side of stroller frame (fig. 2 Loop each elastic (2x) around stroller frame and attach to knob on hood lock (fig. 3 Attach hook and loop fastener strips (3x) at rear of hood to strips on rear of backrest (fig. 3 Release hook and loop fastener strips at rear of hood. 8 To Collapse Hood, release each hood lock by pressing up at center (fig. G). 9 Operating Instructions Harness Parking Brake Care and Maintenance · Periodically check that the parking brake works properly and locks both wheels securely. · Clean out any dirt or debris that may prevent the brake from working. Frame · Wipe the frame with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away excess water and soap. Fabric · Do not machine wash or dry the cover. Cleaning Plastic Parts: · Wipe with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away excess water and soap. Wheels A 1 Position harness around child. B 3 Loosen or tighten harness by sliding each (3x) adjuster to desired position (fig. · Periodically oil caster bolts and wheel axles with liquid silicone lubricant. If Stroller Gets Wet: · Dry stroller with a clean cloth or towel to prevent corrosion. Always make sure that the stroller is dry before storing. Plastic Parts · Do not use abrasives, solvents, strong detergents, or household cleaners. [. . . ] Warranty Limitations This warranty does not include damages which arise from negligence, misuse, salt corrosion, or use not in accordance with the user guide. It is not designed to be compatible with child restraints or carriers. The use of unapproved accessories could cause this product to become damaged or dangerous. Limitations of Damages The warranty and remedies as set forth above are exclusive and in lieu of all others, oral or written, express or implied. [. . . ]