User manual BRITAX B-MOBILE

[. . . ] For use up to 6 months, thread the shoulder straps through the lower belt slots in the backrest. As a travel system with infant carrier from birth to 13 kg The pushchair can be used as a travel system with all Britax/RÖMER infant carriers that are equipped with the "Type A" adapter. Als pram with BABY-SAFE Sleeper from birth to 10 kg The BABY-SAFE Sleeper is only intended for babies that cannot sit up, roll over or support themselves on their hand and knees yet. The pushchair can be used with Britax/RÖMER BABY-SAFE Sleeper marked with the carrycot symbol "Type A". [. . . ] For children under 6 months the shoulder straps 17 must run through the lower belt slots 15. For children over 6 months the shoulder straps can run through the upper belt slots 15. If using an alternative harness conforming to BS6684, D ring attachments are found on each side of the pushchair. Pull the shoulder straps 17 through How to secure your child using the harness: Push the buckle prongs 16 on either Always re-adjust the harness when changing the seating position of your child. To undo the harness completely you will have to unhook the buckle prongs 16 from the shoulder straps 17. Use the pushchair for children under 6 months only with the backrest 20 reclined all the way back. How to raise the backrest 20: Tilt lever 25 together and push the adjuster 21 upwards until the backrest 20 has reached the desired inclination. Opening the hood window 30 How to remove the pushchair seat when you use the B-MOBILE as a travel system: Unfasten the clips around the rod at You can now pull the cover off. How to fit the pushchair seat: Check that all pushchair seat attachment devices are corretly engaged before us. Use with the infant carrier - travel system Please refer to the user instructions supplied with your child safety seat. The B-MOBILE can be used as a travel system with all Britax/RÖMER infant carriers that are equipped with the "Type A" adapter. The infant carrier adapter is simply clipped from underneath into the edge of the infant carrier or is already integrated into the infant carrier. Always apply the brake before fitting the infant carrier onto the pushchair or removing it. Make sure that the travel system Swivel the backrest 20 of the With the infant carrier in a rearwardfacing position, lift it above the pushchair. If your child safety seat is equipped with an integrated travel system adapter, the appropriate description can be found in the user instructions supplied with your child safety seat. Push up the release button 29 on Keep a firm grip on the infant carrier while doing this. You can now remove the infant When using with the BABYSAFE Sleeper, please refer to the user instructions supplied with your carrycot!The B-MOBILE can be supplemented with a suitable raincover 40 and a cosytoes 41. Never use the raincover indoors, in warm weather or near sources of heat - otherwise your child could be exposed to the risk of heat shock. It may be dangerous Do not allow your child to play with the raincover. Always make sure that plenty of fresh air can get in under the raincover 40. Thread the buckle prongs 16 back The cosytoes 41 can be opened This makes it easier to lift your child in and out. [. . . ] This is not a material defect, but rather a normal sign of wear which is not covered by the Warranty. Buckle: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. when processing claims , product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. [. . . ]