User manual BRINKS HOME SECURITY

[. . . ] TABLE OF CONTENTS HOW TO AVOID FALSE ALARMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 THE BRINK'S HOME SECURITY SYSTEM Equipment in the Standard Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Optional Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description of the Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press CANCEL to turn off this feature, or it will automatically be canceled when the system is turned on. 11 ADDING AUXILIARY CODES This feature allows you to add up to six extra codes to turn the system on and off. You can use auxiliary codes when you want to allow someone access to your home, but you do not want to give them your master code. For example, auxiliary codes can be given to houseguests, housekeepers, housesitters, etc. Press and hold the "3" key for 3 seconds. Press 1-6 (You have six "slots" in which to program auxiliary codes. ) Select 1 as the user identification for the first auxiliary code you choose. (The next auxiliary code user identification would be 2, and so on, up to a maximum of six auxiliary codes. ) 5. You may test the code by turning the system on and off with the new auxiliary code. 3 Enter the user identification number (1-6) for the auxiliary code you wish to delete. DO NOT ENTER THE AUXILIARY CODE; instead, press CANCEL to delete the code. You may verify that the code was deleted by turning the system on and trying to turn it off with the code you deleted. The zone number of any alarms in memory will light up for 5 seconds then reset. 12 1. 4. TESTING THE BRINK'S SYSTEM TRANSMISSION AND SIREN TEST NOTICE: Your Protective Service Agreement requires that you test the system each week. When the test signal is successfully received at the Brink's Monitoring Center, the keypad will beep, and the siren will sound a short blast. (If the test signal is not successfully received at the Brink's Monitoring Center, the trouble light will be on. Customer Service is available 24 hours a day, sevsn days a week. ) NOTE: You will not receive a call from the Brink's Monitoring center when you use this feature. TESTING THE DOOR AND WINDOW SENSORS You can test the door and window sensors without sending alarm signals to the Brink's Monitoring Center. (if you cannot get the READY indication, call Brink's Customer Service. ) 3. (Make a note of each sensor that does not cause the keypad to give the tone and call Brink's Customer Service. ) 6. When all doors and windows have been tested, press CANCEL to exit the door chime mode. NOTE: Door chime is automatically canceled when the system is turned on. 13 TESTING THE MOTION DETECTOR You can test the motion detector without sending alarm signals to the Brink's Monitoring Center. Make sure there is no movement in the area protected by motion detector. A service call may need to be scheduled to adjust the motion detector. ) 5. [. . . ] Another standard system will be installed in your new location at no charge, if your move is to a Brink's Service Area. In addition, the new owner of the home may takeover the system by signing a new agreement and paying our current reprogramming fee. If the new owner does not wish to takeover the system, and you do not choose to install a Brink's system at your new location, the original contract obligation will continue. If you choose to pay only the connection fee, Brink's will own the protective equipment. [. . . ]