User manual BREIL AW00

[. . . ] Alarm in 12-hour system: sound alarm, vibration alarm Alarm set time storage function Power saving function for vibration motor at low temperature Low battery warning function Pull the crown out to the time correction position when the second hand reaches the 0 second position. Return the crown to the normal position in accordance with a time signal. When setting the time, the alarm will not sound at the correct time if the auxiliary time is not properly set according to the primary time. The alarm is turned off automatically once it has sounded or vibrated. [. . . ] Wear the watch so that the watch body is constantly in contact with your arm. ⷠIt may also be difficult to feel the vibrations during strenuous exercise or when performing work that involves swinging or shaking your arm. ⷠIf you take off your watch and simply carry it in your pocket and so forth, it may not be possible to detect that the vibration alarm has gone off when the set alarm time is reached. [When Using the sound alarm] · If you wear your watch tightly on your wrist, it may be difficult to hear the alarm sound. ⷠWhen it is difficult to hear the alarm sound due to high levels of surrounding noise and so forth, switch to the vibration alarm. ⷠSwitch to the vibration alarm when desiring to be informed of the time by the alarm in a manner that does not inconvenience those around you. * Refer to the alarm identification mark on the display to determine whether the watch is set to the sound alarm or vibration alarm. When the watch is not worn or when carried in a pocket or other clothing so that the watch falls to a temperature lower than that when normally worn, the vibration motor low temperature power saving feature is activated. When this vibration motor low temperature power saving feature has been activated, the second hand switches to irregular 2-second interval movement. When this happens warm up the watch body by putting the watch on your arm in the manner it is worn normally. The watch will then switch from irregular 2-second interval movement and return to normal operation. As the battery approaches the end of its services life, the second hand will switch to 2-second interval movement, in which the second advances two seconds at the time, informing the wearer that the battery is nearly worn out. When the low battery warning feature is activated, the sound alarm function and vibration alarm function will no longer operate. - In order to prevent water coming into contact with the internal mechanism, never pull the crown out when the watch is wet. - If any watches designed for sportswear or use in water come into contact with salt water or heavy sweating, they should be rinsed in fresh water and dried thoroughly. During daily use Can be worn while swimming but not diving Suitable for skin-diving. - Contact with water may cause a deterioration in the quality of some leather straps. - As internal parts of the watch can retain moisture, when the outside temperature is lower than the inside, the watch glass may mist-up. This phenomenon is purely temporary and should not create any problems. However, if it persists for any length of time, the watch should be checked by the shop where it was purchased or by the nearest Authorised Service Centre. [. . . ] Wearing the watch when the strap or back of the case is dirty can cause skin irritation. cleaning the watch strap: · Metal bands: use a toothbrush and soapy warm to wash the dirt off. Leather straps: gently rub the face of the strap using a soft dry cloth. Periodic inspection In order to guarantee long trouble-free operation, it is advisable to have the watch checked by an Authorised Assistance Centre once every two years. [. . . ]