User manual BREIL 6U50

[. . . ] 1) Press Reset or If Master Code Reset has been programmed by the engineer. 1) 2) Note: Enter a valid User Code Press Reset The terms of your insurance may prohibit User reset. If Tamper reset has been programmed for Engineer Reset the display will show " !!Service Due !" for 3 seconds each time the user attemts to set the system. [. . . ] Please contact your installation company. Pa g e 3 Programmable User Options Several user programmable options are available via user codes 1, 2 or 3. To use these options please continue below. Delete Zone Option This option allows individual zones to be deleted (omitted) when the system is being set. It is only applicable to the one Set state and will need to be repeated for subsequent Sets. If you are removing particular zones on a regular basis ask your installation company to include them in a Part Set. 1) Enter a valid User Code followed by No the display will show:Do You Want to. Delete Zone ? 3) Press YES The display will show:- Enabled Zones . 12345678 4) Press the zone numbers corresponding to the zones you wish to delete from the set procedure. 1-345-78 Pa g e 4 4) Press 0 twice the display will show for example:- Do You Want to. Set User 1 ? 5) Press or Press or Press or Press Full for Full Set Part for Part 1 Set 2 for Part 2 Set 3 for Part 3 Set 6) The system will now start the relevant Set with the zones you deleted removed from the Set. Select characters from the list below:1= 3= 5= 7= 9= ABC GHI MNO STU YZ blank 2= 4= 6= 8= 0= DEF JKL PQR VWX 1234567890 Enter the required character followed by Yes. or Press 0 twice to return to the Unset Mode Pa g e 9 Setting Time & Date 1) Enter a valid User Code followed by No the display will show:Do You Want to. Delete Zone ? 3) Press No the display will show:- Do You Want to. Select Options ? 4) Press Yes the display will show:- Do You Want to. Program Chime ? 5) Press No the display will show:- Do You Want to. Program Codes ? 6) Press No the display will show:- Do You Want to. Set Date / Time ? 7) Press Yes the display will show:- Type 0000 Day / Mnth 8) Enter the Day and Month e. g 0307 for 3rd July followed by Yes the display will show:Type 0000 Hrs / Mins Pa g e 1 0 9) Enter the time using the 24 Hour clock e. g 2300 for 11pm followed Yes the display will show for example:03 Jul Ok ?23: 00 10) Press Yes to accept the display will show:- Do You Want to. Set Date / Time ? 11) To return to the Unset Mode press 0 twice. It should be noted the time displayed after setting the time may be plus or minus one minute. Pa g e 1 1 Reading the Log 1) Enter a valid User Code followed by No the display will show:Do You Want to. [. . . ] Set Date / Time ? 11) To return to the Unset Mode press 0 twice. It should be noted the time displayed after setting the time may be plus or minus one minute. Pa g e 1 1 Reading the Log 1) Enter a valid User Code followed by No the display will show:Do You Want to. Delete Zone ? 3) Press No the display will show:- Do You Want to. Select Options ? 4) Press Yes the display will show:- Do You Want to. Program Chime ? 5) Press No the display will show:- Do You Want to. [. . . ]