User manual BREAK A BEAM M200DC WIRE

[. . . ] Replace only with the same or equivalent type. Risk of injury or damage to the product!• Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Always leave a space of at least four inches around the product for ventilation. [. . . ] Make sure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. Note 2 Your docking system Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. •• The type plate is located on the back of the product. Introduction With this system, you can: • enjoy audio from an iPod/iPhone or external device, • charge your iPod/iPhone, and • listen to FM radio stations. What's in the box Check and identify the contents of the package: a b c ORD7100 User Manual d e f g a Docking speaker b Remote control c User manual d VDE AC power cord e AC power cord for the U. K. f MP3 link cable g FM antenna EN 3 Overview of the system a b c f e d g h a SOURCE • Turn to select a source. b • Press to switch the system between standby mode and normal mode. • Turn to adjust the volume. i • In radio mode, press and hold to activate the automatic search for and storage of radio stations. • For a compatible iPod/iPhone, press to pause or resume music play. • For a compatible iPod/iPhone, press and hold to switch it to sleep mode, or press to wake it up. g AC MAIN~ • Connect to the AC power cord. c Dock for iPod/iPhone d LCD screen e • In radio mode, turn to search for a radio station manually. EN 4 h MP3-LINK • Connect to an external player by an MP3 link cable. i Socket for FM antenna • Connect to an FM antenna. 3 Connect the FM antenna and power cord 1 2 Connect the FM antenna to the product. To tune to a stored radio station, turn the PRESET knob until its sequence number is displayed. 1 2 Switch the source to . 3 Connect the MP3 link cable between • the MP3-LINK socket on the back panel of this product, and • the headphone jack on the external device. Play audio on the external device (refer to its user manual). • EN 9 9 Adjust the volume Turn the knob. 10 Use the remote control During use, you can use the remote control to control play. Activate the battery For the first time use, pull the protective tab out from the battery compartment. Control play During play, follow the instructions below to control play. FM mode Buttons Functions / / PRESET +/- PROG To tune to a specific radio station, press repeatedly until its frequency is displayed. To tune to the previous or next strong radio station, press and hold to start scanning. To tune to a preset radio station, press repeatedly until its sequence number and frequency are displayed. To program radio stations, 1 Tune to the radio station that 2 Press PROG to activate the 3 Press PRESET +/- to select a 4 Press PROG to confirm. To display the clock or current frequency, press it. 10 EN DOCK mode Buttons Functions Replace the battery / / MENU To start, pause, or resume play, press it. To switch the iPod/iPhone to sleep mode or wake it up, press and hold it. To select a track from the library, 1 Press MENU to access the gle through the categories. 2 Press MENU repeatedly to tog3 Press 4 Press / to toggle through sub-categories or select a track. to enter lower-level menu or start the selected track. iPod/Music (iPod/Music) menu of your iPod/iPhone. 1 2 3 Pull out the battery tray and then remove the flat battery. Insert the battery tray. Volume Buttons Functions VOL+/ VOLMUTE To increase or decrease the volume, press repeatedly. To mute the product or release it from mute status, press the button. EN 11 11 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. [. . . ] If a connected iPod/iPhone stays inactive for 15 minutes when it is selected as the source, the system switches to standby mode automatically. If a connected iPod/iPhone stays inactive for 15 minutes when it is selected as the source, the system switches to standby mode automatically. Before you press any function button, select the correct source with the remote control instead of the system. Insert the battery with its polarity (+/– signs) aligned as indicated. [. . . ]