User manual BRAUN VITALSCAN PLUS BP 1650

[. . . ] It rises sharply in the early morning and declines during the late morning. Blood pressure rises again in the afternoon and finally drops to a low level at night. Blood pressure readings from a healthy 31-year old male, measured at 5-minute intervals Blood pressure measured in a doctor's office only provides a momentary value. Repeated measurements at home better reflect one's actual blood pressure values under everyday conditions. [. . . ] ⷠTake off wrist watch and jewelry before fitting the monitor on the measuring arm. ⷠWhile taking a measurement, sit down, relax, keep still, especially the hand of the measuring arm, do not move or speak. Fasten the monitor on the palm side of your wrist, roughly 2 cm below the palm line. At the end of the measurement, a beep sounds and the reading is displayed: Upper (systolic) value Lower (diastolic) value Pulse Otherwise the product will turn off automatically after 2 minutes. If at any time, you want to stop the measurement, press the red start/stop button. After each measurement, the blood pressure monitor automatically stores the reading in memory. Please note that stored data will be erased if changing batteries takes longer than 15 seconds. Repeatedly pressing the memory button will call up one by one all stored readings. ⷠTo exit the memory mode, turn the device off by pressing the start/stop button. BP 1650: The readings of the last 20 measurements with time and date are stored in memory. The lower display line successively shows date, time and pulse of the respective measurement. The lower display line shows «Time» and flashing digits in the «hour» position. To adjust the hours, repeatedly push the «memo» button. Again, repeatedly push the «memo» button to adjust the minutes. ⷠPush button (C) again to adjust the date: The lower display line shows «Date» and flashing digits in the month position. Again, repeatedly push the «memo» button to adjust the day. Otherwise the device automatically turns off after 2 minutes and activates the settings made so far. If used according to the use instructions, periodic recalibration is not required. [. . . ] This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre. [. . . ]