User manual BRAUN SILK EPIL SOFTPERFECTION

[. . . ] 1b The EfficiencyPro clip provides a thorough epilation that is now even faster. Ensuring maximum skin contact and the optimum usage position, it allows removal of even more hairs per stroke. The shaver head 8 is specially designed for a fast and close shave of underarms and bikini line. [. . . ] Optional skin cooling: For the first few epilations or if you have sensitive skin you can use the cooling application, recommended by dermatologists to help reduce possible skin irritation. Ensure that the gel pack has been in the deep freezer (***) for at least 2 hours (for convenience you can store the gel pack in the freezer). Important: Apply cooling glove to the same area for no longer than 2 minutes. Do not use if you are hypersensitive, allergic to the cold, or if your skin suffers from sensory disturbances, when suffering from cardiac diseases or arterial circulatory disorders. The massaging rollers should always be kept in contact with the skin, allowing the pulsating movements to stimulate and relax the skin for a gentler epilation. If you are used to epilation and look for a faster way to efficiently remove hair, please use the EfficiencyPro clip 1b . It allows maximum skin contact and ensures optimum usage so that more hairs are removed in one stroke. 3 Leg epilation Epilate your legs from the lower leg in an upward direction. 4 Underarm and bikini line epilation Please be aware that especially at the beginning these areas are particularly sensitive to pain. For more comfort, ensure that the hair is at the optimum length of 2­5mm. Before epilating, thoroughly clean the respective area to remove residue (like deodorant). When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol. Keep in mind that epilation is more comfortable when the hair is at the optimum length of 2­5 mm (see section «Some useful tips»). Put on the epilation head and make sure that the massaging rollers clip 1a is in place. Plug the cord connector 6 into the socket 5 and plug the transformer plug 7 into an electrical outlet. 1 To turn on the appliance, slide switch 4 to setting «2» («2» = normal speed, «1» = reduced speed). for optimum performance hold the appliance at a right angle (90°) against your skin. [. . . ] As hair does not always grow in the same direction it may be difficult to cut. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. [. . . ]