User manual BRAUN SI2040

[. . . ] During ironing pauses, always place the iron upright on its heel rest and ensure that the heel rest is placed on a stable surface. The iron must not be left unattended while it is connected to the mains supply. Keep the iron away from children, especially when using the Power shot function. [. . . ] For UK only: This guarantee in no way affects your rights under statutory law. Select the temperature according to the ironing guide on the heel rest of the iron or on the label in your garments. The pilot light (7) goes off when the desired temperature is reached (after approx. 1 Vario steam You can select the steam quantity using the steam regulator (3). Preconditioning (only with model SI 2040) Steam also develops horizontally at the front area of the sole plate. This preconditions the textiles by «pre-steaming», thus making ironing easier. 2 Power shot Prior to use, press the Power shot button (5) 3 to 4 times to activate it. Models SI 2030 and SI 2040 only: The Power shot function can also be used in the vertical position for steaming hanging clothes. to remove mineral/starch residues , use a vinegar/water mixture in the ratio of 1 : 2. Never use steel wool, abrasive scouring pads, powders or other chemicals to clean the sole plate. Removing the steam regulator with the anticalc valve: Turn the steam regulator clockwise towards . Keep on turning firmly beyond the resistance until the steam regulator is lifted. when positioned at «· » (anticalc system), pull it out vertically. immerse the anticalc valve in vinegar (not vinegar essence) or lemon juice for a minimum of 30 minutes. [. . . ] this product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. [. . . ]