User manual BRAUN MP50

[. . . ] Put the juice ring 5 on the motor part 1 (fits loosely without engaging). Put the cover 7 on and push down firmly with both hands until you hear it snap into place. Hang the pulp container 4 onto the hinges (the top one first); then close it and be sure it snaps into place. [. . . ] Hang the pulp container 4 onto the hinges (the top one first); then close it and be sure it snaps into place. The juice container comes with a foam separator to ensure clear foam free juice. You can, of course, place a glass or other container underneath the juice spout to collect the juice. For easier filling, put the filling tray 9 on top of the filling shaft 8 (A). Preparing fruit or vegetables Important: Use only well ripened fruits, otherwise the filter 6 may be clogged up which would result in repeated cleaning of the filter. Fruit with large pips or stones should always have these removed first. Cut fruit and vegetables into pieces large enough to fit into the filling shaft. If the juice suddenly becomes much thicker or if you can hear the motor speed slow down, the filter must be emptied (see «Disassembling»). Swing open the pulp container 4, push it up and pull off downward diagonally (B). Press the unlocking buttons 3 on both sides of the juicer (C), to unlock the cover 7. Clean the motor part 1 with a damp cloth Important: The filter ist not dishwasherproof, but can easily be cleaned with a small brush. We recommend to replace the filter after 5 years (available at Braun Service Centres). for space-saving storage , place the filling tray 9 upside down on top of the juicer. this product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC. [. . . ] for space-saving storage , place the filling tray 9 upside down on top of the juicer. this product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC. Please do not dispose of the product in the household waste at the end of its useful life. [. . . ]