User manual BRAUN FREESTYLE SPRINT

[. . . ] Use the iron on a stable surface and rest it on the iron stand or upright on its heel rest. During ironing pauses, always place the iron on the iron stand or upright on its heel rest (making sure that the heel rest is placed on a stable surface). The steam station must not be left unattended while it is connected to the supply mains. The cord and the steam hose should never come in contact with hot objects or with the hot sole plate. [. . . ] ⷠSet the temperature selector (7) according to the ironing guide on the heel rest of the iron or the label in your garments (c). ⷠThe temperature pilot light (8) goes off when the selected temperature is reached. During use, the steam pilot light will go on and off indicating that the boiler is working to maintain the required steam pressure. ⷠWhen pressing the steam button (6), steam will be released from the sole plate (d). ⷠYou can adjust the steam quantity using the steam regulator (2). ⷠWhen starting the ironing session or when you have not used the steam function for some time, the steam still present in the supply hose will condense into water. This may cause some spluttering in the appliance and a few drops of water may come out from the sole plate. Before starting ironing just hold the iron over a cloth and press the steam control button until the steam production has normalised. 1 2 3 4 5 On/off switch (green pilot light) Steam regulator Water low indicator (red pilot light) Steam pilot light (orange) Iron stand Dry ironing If you want to iron without steam, do not press the steam button (6). Vertical steam Hanging curtains and clothes (jackets, suits, coats) can be steam-ironed to remove wrinkles. Hold the iron vertically, press the steam button while passing over the material in up and down movements. Textile Protector (SI 9720 model only) The Textile Protector (18) protects delicate fabrics from heat damage and makes it possible to iron most dark fabrics without an intermediate cloth. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. With the Textile protector, you are able to iron most delicate fabrics with the temperature setting «· After having attached the Textile Protector, wait about 1 1/2 minutes before you start ironing. Refilling the water tank When pushing the steam button with a low water level in the tank, the water low indicator (3) will light up. ⷠPress the on/off switch (1) to turn off the appliance before refilling (e). ⷠRefill the water tank to the «max» marking as described above, then switch on the appliance again. Repeat the process until no more calcium particles come out from the boiler. After cleaning the boiler, remove the funnel, screw the steel cap back into the boiler opening (clockwise) and put on the silicone cap again. Problem Drops coming out of the steam vents Help When you start ironing or after ironing breaks, this is normal (hose is cold ­ steam condenses). [. . . ] Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. [. . . ]