User manual BRAUN 790CC-4

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BRAUN 790CC-4. We hope that this BRAUN 790CC-4 user guide will be useful to you.


BRAUN 790CC-4 : Download the complete user guide (14242 Ko)

Manual abstract: user guide BRAUN 790CC-4

Detailed instructions for use are in the User's Guide.

[. . . ] Do not place the station inside a mirror cabinet, nor over a radiator, nor place it on a polished or lacquered surface. The cleaning cartridge contains a highly flammable liquid so keep it away from sources of ignition. Do not refill the cartridge and use only original Braun refill cartridges. STOP Description Clean&Renew station 1 Cleaning fluid display 2 Lift button for cartridge exchange 3 Station-to-shaver contacts 4 «clean & dry» button D «fast clean» button 5 Cleaning program indicators 6 Station power socket 7 Cleaning cartridge Shaver 8 Foil & Cutter cassette 9 Cassette release button 0 Shaver head «lock» switch q Pop-out long hair trimmer 12 98913705_790cc_MN_S4-110. [. . . ] Under the nose) slide the shaver head «lock» switch 0 to the back position to lock the pivoting head at an angle. € To trim sideburns, moustache or beard, slide the pop-out long hair trimmer upwards. Trimmer off on tr sensitive intensive reset 1 loc k 2 lock lo ck lock off on Tips for the perfect shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Stretch your skin and shave against the direction of your beard growth. Shaving with the cord If the shaver has run out of power (discharged), and you do not have the time to recharge it in the Clean&Renew station, you may also shave with the shaver connected to an electrical outlet via the special cord set. Release release Cleaning Automatic cleaning After each shave, return the shaver to the Clean&Renew station and proceed as described above in the section «Before shaving». With daily use, a cleaning cartridge should be sufficient for about 30 cleaning cycles. The hygienic cleaning cartridge contains alcohol, which once opened will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately 8 weeks. 2009 10:56:35 Uhr The cleaning cartridge also contains lubricants, which may leave residual marks on the outer foil frame after cleaning. However, these marks can be removed easily by wiping gently with a cloth or soft tissue paper. Manual cleaning The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. Rinsing the shaving head under running water is an alternative way to keep the shaver clean, especially when travelling: • Switch the shaver on (cordless) w and rinse the shaving head under hot running water. Release im trim me r on Series Series • Next, switch off the shaver, press the release button 9 to remove the Foil & Cutter cassette 8 and let it dry. € If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the Foil & Cutter cassette. Alternatively, you may clean the shaver using the brush provided: Series 7 release er oill click! trimmer Series 7 release Series 7 • Switch off the shaver. Remove the Foil & Cutter cassette 8 and tap it out on a flat surface. However, do not clean the cassette with the brush as this may damage it. Cleaning the housing From time to time clean the housing of the shaver and the Clean&Renew station with a damp cloth, especially inside the cleaning chamber where the shaver rests. Replacing the cleaning cartridge After having pressed the lift button 2 to open the housing, wait for a few seconds before removing the used cartridge to avoid any dripping. [. . . ] Rask rengjøring Trykk på knappen for rask rengjøring («fast clean») D for å aktivere programmet for rask rengjøring uten tørking. Indikator for lavt batterinivå: Indikatoren for lavt batterinivå, som er markert med en rød flamme, vil blinke for å vise at batterinivået er under 20 %. Når du har skiftet ut kassetten med skjæreblad og lamellkniv, bruker du en kulepenn for å trykke inn tilbakestillingsknappen t i minst tre sekunder for å tilbakestille telleren. High high low empty high low empty cl e an & d ry clean fast clea n fast clean fast clean high low empty high low empty «high» räcker till 30 rengöringar «low» räcker till (7) rengöringar «empty» ny kassett behövs Laddning och rengöring av rakapparaten Sätt in rakapparaten med rakhuvudet nedåt i rengöringsstationen. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BRAUN 790CC-4




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BRAUN 790CC-4 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.