User manual BRAUN 7681

[. . . ] The narrow epilation head (8) is perfectly suited to follow the contours of delicate body parts such as under the arms and the bikini area. A reduced number of tweezers and the narrow design, specifically adapted to these body areas, improve the handling and ensure a particularly gentle epilation in these areas. The precision head (9) provides utmost precision and control in removing unwanted hair from face and other sensitive areas. Its 6 unique narrow and elevated tip allows for better visibility of the area to be epilated. [. . . ] When the red low-charge light (5b) comes on, connect the appliance to an electrical outlet via the special cord set to recharge. As a safety feature, it may happen that in a low-charge mode, the appliance turns off. In this case, simply turn back the switch to «0» and recharge the appliance as required. Maximum battery capacity will only be reached after several charging/discharging cycles. In order to best prepare your skin for epilation, use the Silk· pil pre-epilation wipes included. Carefully wipe over the area to be epilated and wait approximately 30 seconds before you start epilating. Always make sure that the epilation head (2) is provided with a cap. Press one of the lock keys and turn the switch clockwise to setting 2 (optimum setting). It reproduces an almost daylight condition, thus revealing even the finest hair and giving you a better control for improved epilation efficiency. 2 How to guide the appliance · Always stretch your skin when epilating. Always make sure that the epilation area between the massaging rollers is in contact with your skin. Guide the appliance in a slow, continuous movement without pressure against the hair growth, in the direction of the switch. As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimum results. The pulsating movement of the massaging rollers stimulate and relax the skin for a gentler epilation. If you are used to the sensation of epilation and prefer a faster way of removing hair, attach the Efficiency cap (1b) replacing the massage system (1a). 3 Leg epilation Epilate your legs from the lower leg in an upward direction. 4 Underarm and bikini line epilation For this specific application, the narrow epilation head (8) has been developed. Thanks to its specific design adapted to the contours of these areas, it provides a gentle and thorough epilation. Please be aware that especially at the beginning, these areas are particularly sensitive to pain. For more comfort, ensure that the hair is at the optimum length of 2-5 mm. Before epilating, thoroughly clean the respective area to remove residues (like deodorant). When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. [. . . ] To maintain optimum shaving performance, replace your foil and cutter block when you notice a reduced shaving performance. How to replace the shaving parts Shaver foil: Press the release buttons to remove the shaver head. Cutter block: To remove the cutter block, press and turn it 90° (G1), then take it off. To put on a new cutter block, press it onto the cutter block holder and turn 90° (G2). [. . . ]