User manual BRAUN 5874

[. . . ] Our products are designed to meet the highest standards of quality, functionality and design. Warning Your shaver is provided with a special cord set with an integrated Safety Extra Low Voltage power supply. 5874 and 5875 models: The green charging light blinks when the shaver is being charged. [. . . ] ⷠOnce the shaver is completely charged, discharge the shaver through normal use. Maximum battery capacity will only be reached after several charging/discharging cycles. ⷠIf the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set. Warning: Detach the hand-held part from the power supply before cleaning it in water. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean: · Switch the shaver on (cordless) and rinse the shaving head under hot running water. A natural based soap may also be used provided it contains no particles or abrasive substances. ⷠNext, switch off the shaver, remove the shaver foil and the cutter block. ⷠIf you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil. Alternatively, you may clean the shaver using the brush provided: · Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil and cutter block: 5000 series) The replacement light will remind you during the next 7 shaves to replace the shaving parts. After you have replaced the shaving parts (foil and cutter block), use a ball-pen to push the reset button (9) for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. Preserving the batteries In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Do not expose the shaver to temperatures higher than 50°C for extended periods of time. [. . . ] The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre. For UK only: This guarantee in no way affects your rights under statutory law. [. . . ]