User manual BRANDT ROB506BG

[. . . ] Safety tips when connecting the appliance: This appliance is intended for household use only. It can only be used in covered, closed and warmed environment such as kitchen or a room with the same specifications. After removing the packaging, check that the appliance is in good condition and especially that the power cord is not damage. Before connecting the appliance, make sure that the electric power supply is compatible with the power rating and voltage indicated on the bottom of the appliance. [. . . ] The manufacturer shall not be liable for any damage resulting from improper use. The appliance is intended for domestic use only in private housing environments. Power supply Rated power Chopper capacity Dimensions mm (HxLxW) At the end of its working life, the product must not be disposed with household waste. It must be taken to a special local authority waste collection centre or to a company providing this service. Disposing household appliances separately avoids possible negative effects on the environment and health and enables the constituent materials to be recycled which saves energy and resources. To remind you that you must dispose of this appliance correctly the symbol shown above appears on the product warning you not to dispose of it with household waste. For further information, contact your local authority or the shop where you bought the product. On / Off switch Pulse: If you wish to chop food with short pulses, puch the centrer of the button as many times as you need On: ON Off: 0FF When unpacking the product and removing packing material, handle the Chopping Blade, and Slice/Shred Disc carefully; they are very sharp. Before using this appliance for the first time, clean the motor unit with a damp cloth. Assembly - Place bowl (3) on top of motor unit (1), ensuring that the two closing fixtures interlock. Information on the maximum feeding amounts can be found in the processing instructions. Put the lid onto the bowl (4) in such a way as to allow the L-shaped lug to be turned into the safety slit situated beneath switch. The appliance can be started only if the lug on the lid is correctly positioned in the safety slit. - Disengage and remove the lid only when the chopper blade has stopped rotating. - When you have finished preparing your food, pull out the mains plug. - Do not work with the chopper blade for more than 2 minutes at a time. After 2 minutes of continuous operation, allow the appliance to cool down for 5 minutes. - Do not attempt to cut or chop up hard food-stuffs such as coffee, ice etc. - Allow cooked foods to cool down slightly before placing them in the bowl. - Should you wish to process different types of foods, always start with the hardest one. - Stop processing if you notice that bits of food are sticking to the walls of the bowl. b) Using the shredder and slicer Assembly - Insert the bowl as when working as a chopper. [. . . ] - Do not use rough scouring pads or cleansers on any plastic or metal parts. - Do not fill the bowl with boiling water or place any of the parts of the appliance in boiling water - Discoloration on the housing caused by carotene, for example, can be removed using cooking oil. b) Storing the food processor After cleaning the various parts, wipe gently with a clean cloth. Service calls Any repairs that are made to your appliance must be handled by a qualified professional authorised to work on the brand. [. . . ]