User manual BRANDT B4027FHD

[. . . ] B e ow D nl oa Warning REGULATORY INFORMATION This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Relocate the receiving antenna. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] € Balance You can adjust the sound balance of the speakers to preferred levels. € AVL You can set the AVL (Automatic Volume Limiting) option On or Off. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments. • SPDIF You can select a desired SPDIF Output mode: Off , Raw or PCM. € Audio Description (In DTV mode) Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if the broadcaster supports that additional narration track. Press the ▲/▼ button to highlight Audio Description, then press the ►button to enter sub-menu. Press the ▲/▼ button to highlight Mode, and then press the ◄/► button to select On or Off. € Sound Type (In DTV mode) Press the ▲/▼ button to highlight Sound Type, then press the ◄/► button to select d de fro m w w w . Configuring the Channel Menu • Tuner Type Before your TV can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (antenna or cable). If the set signal type is wrong, it is possible that no channel can be found. Tuner Type is Antenna: Country: Press the ◄/► button to select the correct country. Tuner Type is Cable: Country: Press the ◄/► button to select the correct country. Network ID: Press the ◄/► button to select Network ID: Auto or enter digital numbers. Frequency: Press the ◄/► button to select Frequency: Auto or enter digital numbers. Symbol Rate: Press the ◄/► button to select Symbol Rate: Auto or enter digital numbers. - Digital Manual Scan: Press the▲/▼ button to select the Digital Manual Scan, then press the ENTER button to enter sub-menu. tuner Type is Antenna: Digital Scan: Press the◄/► button to select the channel number. Tuner Type is Cable: Network ID: Press the ◄/► button to select Network ID: Auto or enter digital numbers. B e ow D nl oa Menu Operation Symbol Rate: Press the ◄/► button to select Symbol Rate: Auto or enter digital numbers. modulation: Press the ◄/► button to select Modulation: Auto , 16QAM , 32QAM , 64QAM , 128QAM , 256QAM. [. . . ] Picture is the wrong size or the source device (computer, DVD player, set top box and so on) will not let you set up the pixel resolution the display can reproduce. Picture looks squashed or stretched even though the aspect ratio controls are set correctly (for example 4:3 or 16:9). No sound Equipment feeding the display is set to the wrong aspect ratio. Remove any objects and aim from straight in front of the remote sensor with a clear line of sight. [. . . ]