User manual BOSTON ACOUSTICS VS

[. . . ] Adjustable Feet Each of the VS Series models, exceptVS344, isequippedwith adjustable feet that lets you change the vertical angle of the speaker to suit your installation. [. . . ] Lower the speaker to seat the mounting posts inthemountingplate. Whenthespeakerispositionedhorizontally the vertically positioned keyhole openings are used. wall mounting plate NOTE: The customer is responsible for the correct selection and use ofmountinghardware(availablethroughhardwarestores)thatwillensuretheproperandsafewall-mountingofthespeakers. Note: these 2 pages are extracted from 142-003284-5 VS manual updated 11-AUG-09 4 Unpacking the System Carefully unpack the speakers. If there is any sign of damage from transit, report it immediately to your dealer and/or delivery service. The high-gloss finish of the VS Series cabinets is protected during shipment with a clear plastic film. However, to remove a VS grille, place your fingers gently on edge of the grille and starting at one end of the speaker, pry along the length of the speaker until the grille pops off. To replace the grille, fit one long edge into position, and then gently push the other long side of the grille against the cabinet until the grille snaps into place. Placement Options this was not corrected to take out the reference to the VS260 VS 336, VS 344 ­ These are classic floorstanding "tower" speakers. For best sound balance place it near an open wall surface, at least 3feet(1m)awayfromthecornersoftheroom. VS 325C ­ This model is designed specifically for use as a center channel speaker in an A/V system. It should be centered on the television as close as possible to the screen. [. . . ] The adjustable foot and the mounting bracket allow for vertical or horizontal orientation and optimal positioning. Note: these 2 pages are extracted from 142-003284-5 VS manual updated 11-AUG-09 3 [. . . ]