User manual BOSTON ACOUSTICS SOLO

[. . . ] No objects filled with liquids, such as vases, shall be placed on the apparatus. This symbol found on the apparatus indicates that the apparatus must be placed in a separate collection facility for electronic waste and not disposed with household waste. Either the power inlet connector on the rear of the apparatus or the power plug at the wall must remain accessible, to be able to disconnect power from the apparatus. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. [. . . ] These logical, intuitive controls make it easy to operate the Horizon Solo. Once you learn how to control one of the features the rest of them will be easy. You may not need to refer to this manual once you understand the way the controls work. Turn the MODe control until the clock icon is highlighted with brackets . To change the time display turn the MODe control to highlight the clock icon with brackets . Turn the MODe control to select the time format you want, then press the control. Turn the MODe control until the source you want is highlighted with brackets. Note that other function and alarm setting control icons also may be selected. Note: You can also select sources by simply pressing the MODe control. Turn the tune control until the station frequency you want shows in the display. ⷠIftheradiosourceyouwantitalreadyselectedyoucanskip step 1 and use the tune control to tune in a new station. Use the MODe control to select the AM or FM radio band you want to use. The preset number will light indicating the station has been assigned to the preset. Because of the way the Solo places stations in the presets you may want to plan how you store them. If you remove a preset all the stations in presets above the one you removed, drop down a preset position. the Preset indicator , the preset number and the station frequency will light. In this example AM preset 5, with station frequency 1050 assigned to it, has been selected. When the Preset has been cleared the station frequency, "radio" and the AM/FM band indicator are replaced with "_ _ _ _" . Note: You must tune in the preset you want to delete with the Preset source. If you tune in a radio station that has been placed in a preset using the AM or FM source, you will see the Preset indicator and number in the display, but you will not be able to delete the preset. To clear all the presets ­ Using the Preset source, tune in any preset station. Each can have its own type of alarm--wake to tone, wake to music or both. [. . . ] If your headphones have the old-style large plug you will need an adapter. Other audio equipment, such as an iPod or a portable CD player, can be connected to the Solo through the rearpanelAuxinput. There is a security cable connection point on the rear of the Solo adjacent to the AM antenna connector. This is the same as the connection point found on most laptop computers. [. . . ]