User manual BOSTON ACOUSTICS NCBR8

[. . . ] NCBR5 NCBR6 NCBR8 NEW CONSTRUCTION BRACKETS for Boston Acoustics Designer Series Ceiling Mount Speakers INSTALLATION INSTRUCTIONS The New Construction Bracket is a mounting frame to simplify the installation of Boston Acoustics Designer speakers. [. . . ] The finished opening should align with the edges of the new construction bracket's flange. Using nails or drywall screws, attach the two wings to the joists or studs so that the wings are 90° to the bracket. There will be some play in the bracket to allow for minor adjustments or leveling. Bend "speaker wire tie-down tab" inwards, and secure to speaker wire with a cable tie. opposite wings NCB speaker wire tie-downs 90° excess wing NCB *Behind the wall there must be 1 inch (25. 4mm) clearance around the mounting hole. Cover5 Cover6 Cover8 Cover5R Cover6R Cover8R COVER PLATE for Boston Acoustics Designer Series Ceiling Mount Speakers The Cover Plate is a blank plate that covers a pre-cut hole for the installation of a Boston Acoustics Designer Series ceiling-mount speaker. The Cover Plate may also be used with a Boston Acoustics New Construction Bracket. The Cover Plate can be painted or wall papered to match the wall or ceiling color. A house has been pre-wired and the speakers have not yet been purchased. [. . . ] Boston and Boston Acoustics are registered trademarks of Boston Acoustics, Inc. [. . . ]