User manual BOSTON ACOUSTICS INSTALLATION

[. . . ] Behind the mounting surface there must be 11/2-inches (38mm) clearance on either side of the short sides. [. . . ] NOTE This manual assumes the installer possesses skill in the proper use of hand and power tools, knowledge of local building and fire codes, and a familiarity with the environment behind the wall or ceiling in which the speakers will be installed. A utility knife, jig saw or other tool for cutting the required hole in the mounting surface. Insert a long, bent piece of wire and rotate to confirm that there are no obstructions behind the chosen location. The HSi speaker jack will accept either bare wire up to 14-gauge, or single banana plugs. If you wish to paint your speakers or grilles it should be done prior to installation of the grille. If you are applying paint with a brush or roller, thin the paint and apply two very light coats. This helps prevent excessive paint buildup or "runs" on the frame. After the paint has dried, use the finger pulls to remove the paint mask. [. . . ] After it has been repaired, we will return it freight prepaid in the United States and Canada. [. . . ]