User manual BOSS WAR W875

[. . . ] 19 Reset The Factory Setting . . . . . . . . . . . . 19 Scroll Caption Adjustments . . . . . . . . . . 19 Radio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Listening to the radio . . . . . . . . . . . . . . . . . . . 20 Storing stations in memory . . . . . . . . . . . 20 Listening to a preset station . . . . . . . . . 25 AUX Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 On-Screen Disc Operations . . . . . . . . . [. . . ] 17 Basic Operation LCD Monitor Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on front panel ) to access the Picture mode selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Rear View Camera When you connect a rear view camera to this system. Once you engage the car into Reverse the screen will show the camera image. Then once you take the car out of Reverse the screen will go back to the previous mode. Audio Quality Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on the front panel ) to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Bass Treble Balance DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ touch to select touch to adjust Volume Bass Treble Balance Buzzer Tint Contrast Bright Fader Color Buzzer Tint Contrast Bright Fader Color DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color for the picture-lighter or darker. BRIGHT: 0 to 32 User can use the Vol+/- knob to adjust the brightness level from 0 to 32 . CONTRAST: 0 to 32 To adjust the contrast of the bright and dark portion. -Adjustable when " NTSC " is selected for " NTSC/PAL " . 18 touch to select touch to adjust It`s depend on your habit to setup the data . ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . Basic Operation Balance: R 0-10 to L 0-10 . 21 In Radio mode, touch it to select the desired item, it will display the following as below : FM1 ST 106. 30 MHz DX TA CH 6 LUD SWF SWF LUD TA POP DISC DSP 11:08 CLK AF PTY TA Traffic Annonuncement (priority For Traffic Information) In Radio mode, touch the TA section briefly (or swing the SEL knob briefly in the TA/AF direction) , to activate the TA function. Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . TA Radio Operation During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . AF FUNCTION (Alternative Frequencies) In Radio mode, touch the AF section briefly (or swing and hold the SEL knob in the TA/AF direction) , to activate the AF function. AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into . AF minutes in the case of weak signals. Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message "NEW FREQUENCY " is displayed for one or two seconds. [. . . ] 34 TV Operation Switching to TV mode 1. Connect the TV antenna to the TV. IN (from Ant) jack on the back of the unit. 2. Touch the MOD section on the touch screen (or press the MODE button on the front panel to select the TV mode. The message will display in the monitor as follow : TV LUD 001 SWF POP DISC 11:08 SKIP MOD VOL- SEL VOL+ TA AF Touch it to select the other item . TV LUD 001 SWF POP DISC 11:08 SWF LUD DSP CLK SEARCH FINE+ FINE- Touch it to select the other item . Other Main Operation TV LUD 001 SWF - The numeric button (0-9) allow you to select the corresponding channel directly. 11:08 POP DISC 0 6 1 7 2 8 3 9 4 SKIP 5 Note: In TV mode, the +10 button is not available. Fine Tuning FINE+ Touch it for previous . FINE- Touch the "fine+/fine- " section on the touch screen (or press / button on the remote) to fine tune the current channel . TV LUD 001 SWF Channel ADD/DEL MOD POP DISC 11:08 SKIP VOL- SEL VOL+ TA AF Auto searching TV channels Touch the "search" section on the touch screen (or press the Search button on the remote to star search channel automatically. It will display the following as below: SEARCH In TV mode , after search channel automatically, when you want delete the no sign channel, touch the SKIP section on the touch screen (or press the SKIP button on the remote , the screen display SKIP), the channel will be deleted. [. . . ]