User manual BOSS MP3-4600R

[. . . ] BUTTONS LOCATION AND FUNCTIONING 1 PANEL RELEASE BUTTON 12 3 17 PRESET EQUALIZER BUTTON 4 PANEL OPEN/EJECT BUTTON POWER LOCAL / DX BUTTON BUTTON ENCODER VOLUME BUTTON MUTE AUDIO BUTTON BUTTON PRESET MEMORY BUTTONS (M1~M6) BAND/LOUDNESS BUTTON 10 5 2 7 13 MP3 SEARCH BUTTON MENU BUTTON 8 6 DISPLAY BUTTON IX-BASS/ SUB-WOOFER BUTTON 15 REMOTE CONTROL RECEIVER SCAN BUTTON 9 AUTOMATICALLY TUNING UP / DOWN SOURCE BUTTON / STORE / PRESET TRACK UP / DOWN SUB-WOOFER SCAN BUTTON BUTTONS LEVEL CONTOL FOLDER DOWN /UP BUTTONS 16 11 14 18 ID3 TAG INFORMATION E-1 2. HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. [. . . ] Rotate the volume control to select the "BEEP TONE Off" option. Illumination Color (COLOR) This option allows selection between two colors for the backlight illumination of the unit. "COLOR 1" is the default display and will illuminate the unit in blue backlight. Rotate the volume to select "COLOR 2", , which will illuminate the display in red backlight. Selectable Clock Display (CLK ON LCD) When the selectable clock display feature is activated, the clock and default greeting note will appear in the display when the radio is turned off but the ignition switch is still on . To select that the clock and greeting not be displayed when the unit is powered off, rotate the volume control to select "CLK ON LCD Off". Key Illumination On/Off (KEY LIGHT) The Key Light on/off feature controls how the front panel buttons illuminate when the unit is turned off, but the ignition switch is on. When the Key Light feature is activated with the unit turned off and the ignition turned on, the front panel buttons will illuminate. When the Key Light feature is deactivated with the unit turned off and the ignition switch turned on, the front panel buttons will not illuminate. E - 10 Personal Text Message Press the MENU button you will see the "PTM" on the display , this will allow the user to input his favor . greeting note on the display. 20 letters or symbols for the "PTM" to be displayed on the LCD. When "PTM" is displayed on the display, Press "ENTER" button to start up the "PTM" enter procedure. If you want to change the inputted letters , you can press Tuning up /down button to move, the cursor backwards to change the inputted letters. If no more buttons are pressed after 7 seconds the inputted letters will be automatically set as PTM. The previous PTM will be erased automatically once a new PTM is entered. Press "DISPLAY" button sequential (Frequency -> Spectrum -> Animation 1 -> Animation 2 -> PTM ). The inputted Message will scroll through the LCD continuously until a new operation of the unit has been entered. GREETING NOTE There are three different greeting notes displayed on LCD based on different condition. 1. When the unit is powered on, one of three greeting will display based on the time of day: Good Morning, Good Afternoon or Good Evening. When the unit is powered off but the ignition remains on, the LCD will scroll through the following messages if the selectable clock display feature is activated: "Enjoy Driving!Have a nice day!" will be displayed Before the unit turns off completely. IGNITION OFF CLOCK RECALL The user can recall to display the clock by pressing DISPLAY button, even when ignition is off. E - 11 8. TUNER OPERATION 13) BAND BUTTON (BAND/MP3 SERACH) Press BAND to change between FM bands and AM(MW) bands. 14) TUNING UP/DOWN BUTTON ( ) Manual Tuning Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency number up or down one step. [. . . ] Folder "06 " & File "016 MP3" During MP3 or WMA files playback, press MP3 search button (Band Button) twice LCD will display "Navigate search", Press "Audio Select" key or rotate the "Encoder Volume knob" to enter the "Navigate search". Rotate encoder volume until LCD displayed "06", Short Press MP3 enter key (Audio Select Button) to go into folder "06" (Note: If MP3 enter key is press more than 3 seconds. The first file "015. MP3 " will start playing)The "015. MP3" file will be displayed on the LCD, Rotate encoder volume until LCD displayed "016 MP3" (Note: Press the "AS/PS" button will allow a quick return back to folder "06" or rotate encoder volume anti-clockwise backward to "06" Press and hold MP3 enter key (Audio select Button) to confirm play "016 MP3" file The Folder Navigate sequence on Display is as follows: ROTATE ENCODER CLOCKWISE ROTATE ENCODER CLOCKWISE ROTATE ENCODER CLOCKWISE ROTATE ENCODER CLOCKWISE LCD DISPLAY 01 02 03 04 PRESS ENTER KEY LCD DISPLAY PRESS ENTER KEY 05 06 015. Folder "06" & File "016 MP3" During MP3 or WMA files playback, press MP3 search button (band button) three times LCD will display "alphabet search", Press "Audio Select" key or rotate the "Encoder Volume knob" to enter the Alphabetical search. [. . . ]