User manual BOSS ME-5

[. . . ] The best area to "TOUCH" on the panel to make it activate is the illuminated or lighted area. For example, just touch for 2 to 3 seconds the illuminated power symbol and the unit will turn on or off. 1. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. [. . . ] In the stand by mode, when a traffic announcement broadcast starts, the traffic announcement broadcast will be received as top priority regardless of the function mode. When a traffic announcement starts, "TRAFFIC INFO" will show on the LCD, press the TA button can cancelled the broadcast reception while a traffic announcement broadcast is being received. The unit will go back to the previous mode and TA goes into stand by mode again. A beep Alarm tone is heard and the LCD will show "Lost TP TA". PTY Function Pressing PTY button < 3 seconds to goes into PTY select mode. The user now has 5 seconds to select the desired PTY item by using volume up/down button. Once selected the PTY item, user have 5 seconds to press "SELECT" or "TUNE UP or TUNE DOWN" buttons < 3 seconds to seek for the selected PTY item. If no station with the selected PTY broadcast can be received, the LCD will display "No Match PTY" and blinks for 5 seconds then returns to the previous mode. After selected a PTY item, long press any one of the preset memory button can store the selected PTY. To recall the stored PTY item by switching on PTY mode then press preset memory < 3 seconds, the unit will automatically search the stored PTY station in the preset memory Music Group POP , ROCK Speech Group NEWS, AFFAIRS, INFO SPORT, EDUCATE, DRAMA CULTURE, SCIENCE, VARIED EASY, LIGHT CLASSICS, OTHER JAZZ, COUNTRY NATION, OLDIES FOLK WEATHER, FINANCE, CHILDREN SOCIAL, RELIGION, PHONE IN TRAVEL, LEISURE, DOCUMENT Note: Factory default stored for PTY preset memory. M1/News, M2/Information, M3/Pop Music, M4/Sports, M5/Classics, M6/Finance. 15 11. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. For example, a media with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select as shown below. Subfolders are shown as folders in the folder currently selected. ROOT 1 LEVEL 2 LEVEL 3 LEVEL 4 LEVEL 01 001. MP3 002. MP3 003. MP3 004. MP3 04 009. MP3 "NOT DISPLAY" X 010. MP3 011. MP3 05 012. WMA 013. WMA 014. WMA 06 015. MP3 016. MP3 02 07 017. MP3 018. MP3 08 019. MP3 020. MP3 "NOT DISPLAY" X 005. MP3 "NOT DISPLAY" The equipment assigns folder numbers. It is not possible to check folders that do not include MP3/WMA files. (These folders will be skipped without displaying the folder number and name) X 09 021. WMA 022. WMA 023. WMA 03 006. MP3 007. MP3 008. MP3 "NOT DISPLAY" X 17 FILE/FOLDER PLAY There are three different play methods as following: File/Folder Intro play: Press M2 button more than 3 seconds during playing MP3/WMA file for "intro play" all files of the current folder. Intro play should restart from the first song of the current folder, after all files in the current files have been intro-played. To disable current folder "intro play", long press M2 button more than 3 seconds Press M2 button less than 3 seconds is "intro play" all files on the media device. Intro play should re-start at the very first file of the media device after all files in the file has been intro played. To disable all files "intro play", press M2 button less than 3 seconds File/Folder Repeat play : Press M3 button more than 3 seconds during playing MP3/WMA file for "repeat play" all files of the current folder. And keep on repeat playing the current folder until "repeat play" is disabled. To disable current folder "repeat play", long press M3 button more than 3 seconds Press M3 button less than 3 seconds to "repeat play" the current file. [. . . ] User can rotate the encoder to select " " to confirmthe erase or rotate the volume knob to select " " to cancel the ERASE mode. Once the " " is displayed on the LCD, press the AUDIO button to final confirm to erase the selected music file. If want to CANCEL the erase of the present music file, Rotate the encoder volume knob to " ". Once the " " is displayed on the LCD, press the AUDIO button again to cancel the erase mode. [. . . ]