User manual BOSS GT10D

[. . . ] 2 3 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Select Playback Mode . . . . . . . . . . . . . . . . . . . . . 25 AUX Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 On-Screen Disc Operations . . . . . . . . . . . . . 27 In-Dash AM/FM DVD/MP3/CD Receiver With Bluetooth 5 Widescreen Touchscreen TFT Monitor With Front Panel USB Port DISC Special Functions . . . . . . . . . . . . . . . . 31 Preferences Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Defaults Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Other Main Operations . . . . . . . . . . . . . . . . . . . 36 USB Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Adjust sound balance between front and rear speakers by using VOL + / VOL - . to ahead/back (proceed/cancel) , and then press the SETUP button briefly to confirm . FM1 106. 30 MHz ST DX TA LUD SWF POP DISC 11:08 Setting Audio Modes Touch the screen the DSP range (or press the EQ/LOUD button on the remote ) to select one of the preset sound modes . The information will display in the monitor as follow : DSP (Please note : press the button longer again to renew it . ) Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. Error symbol on the display. POP FLAT ROCK JAZZ CLASSIC DVD 11-0:44:36 LUD SWF POP DISC 11:08 TA AF RDM SWF INT LUD RPT DSP OSD CLK RESET RESET touch to select It`s depend on your habit to select the Audio mode . Scroll Caption Adjustment In Radio mode: You can adjust your desired scroll caption , the method of the operation as follow: A). Press and hold the SETUP button (for about 2 seconds) on the remote control, the adjustment scroll bar will display on the screen . Use the VOL+/- to select among of the "A, B, C . . . . X, Y, Z, and blank ", and use the / button on the front panel 19 NOTE: If RESET is selected, all memory data will deleted, please re-adjust . Radio Operation Listening to the Radio Switching To Radio Mode MOD FM1 FM2 FM3 AM1(MW1) Touch the MOD range repeatedly on the touch screen to select the RADIO mode. If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment . PTY FUNCTION PTY In Radio mode, touch the PTY section briefly (or press and hold the MUTE/PTY button on the front panel) , to select the Program type . PTY Selection of the program type besides the stations name, some FM stations also transmit information on the type of program. With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message "PTY SEEK" then appears briefly in the display . when PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, "NO PTY" appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode . Touch and hold (for more than 2's )the screen of " AF " section , the AF function is activated. When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few minutes in the case of weak signals. 22 DISC Operation Basic Operation During DISC playback, you can touch the screen to display the following : DVD 11-0:44:36 LUD SWF POP DISC 11:08 TA AF RDM SWF INT LUD RPT DSP OSD CLK DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOLUME- SEL VOLUME+ Touch it to select the other item . 1 2 3 4 5 6 DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD SUBTITLE AUDIO SET VOLUME- SEL VOLUME+ GOTO TITLE 10 9 8 7 1. Previous 2. Next 3. Pause 4. Stop 5. Mute 6. Mode 7. To next page 8. Volume+(adjustment+) 9. Select 10. Volume-(adjustment-) Touch it to select the other item . DVD 11-0:44:36 ENT Touch it to select the other item, it will display the following as below: Above these operation buttons for DVD setup. 11:08 DVD LUD 11-0:44:36 SWF POP DISC CALL ZOOM RECALL PAIR Touch it for previous . Touch it to select the other item . 23 DISC Operation Switching the DVD mode MOD Skipping Track During DISC playback, Touch the / section on the touch screen to skip to next/back one track. [. . . ] If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback. Changing From USB to DISC Playback Modes If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode. you can also select the desired item of the USB device . The buttons on the remote control, on the device, have the same functions as the touch buttons of this touch screen have . Important Note: To prevent damage to the USB device, do not remove or disconnect it during playback. [. . . ]