User manual BOSS DIABLO DC126D

[. . . ] Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). There are paste residue. Ink is sticky (P . 5). ******* **** ******* ******* ******* P1 . Do not stick paper or tape on the disc (P P5 . Do not use rental CDs with old labels that are beginning to peel off. Stickers that are beginning to peel away, leaving a sticky residue (P . 6). Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car (P . 3). Do not use your CDs with labels or stickers attached. Labels are attached (P . 7). ******* ******* ******* ******* ******* P7 . [. . . ] BASIC OPERATIONS 1) PANEL RELEASE BUTTON Press this button to remove the control panel. 12) POWER ON/OFF BUTTON Press POWER button or any other button on the front of the radio (except Open/Eject)to turn the unit on. 16) SOURCE BUTTON Press SOURCE button to select a different mode of operation as indicated on the display panel. CD mode will only appear in the , menu if a CD is present in the CD player (CD mode), and CD changer mode will only appear if a CD changer is connected to the unit. AUX INPUT Connect the external signal to the RCA line in jack located at the rear of the unit , then press Mode button to select Aux mode. Press Mode Button again to cancel Aux Mode and return to previous mode. 2) MUTE BUTTON (MUTE) Press the mute button momentarily to mute the audio volume, and "Mute" will flash in the display. Press the mute button again to restore volume to the previous setting. 10) ENCODER VOLUME BUTTON To increase the volume, rotate the volume control clockwise. When volume is adjusted, the volume level will be shown on the display panel as a number ranging from 0 (lowest) to 46 (highest). 5) AUDIO BUTTON (PUSH/AUDIO) Press the AUDIO button , the display will be displayed first option is Volume, followed by Subwoofer (only if the Subwoofer feature is currently activated), Bass( only if EQ is currently deactivated), Treble( only if EQ is currently deactivated), Balance, Fader and back to Volume. Rotate the volume control to select the "BEEP TONE Off" option. Illumination Color (COLOR) This option allows selection between two colors for the backlight illumination of the unit. "COLOR 1" is the default display and will illuminate the unit in blue backlight. Rotate the volume to select "COLOR 2", , which will illuminate the display in red backlight. Selectable Clock Display (CLK ON LCD) When the selectable clock display feature is activated, the clock and default greeting note will appear in the display when the radio is turned off but the ignition switch is still on . To select that the clock and greeting not be displayed when the unit is powered off, rotate the volume control to select "CLK ON LCD Off". Key Illumination On/Off (KEY LIGHT) The Key Light on/off feature controls how the front panel buttons illuminate when the unit is turned off, but the ignition switch is on. When the Key Light feature is activated with the unit turned off and the ignition turned on, the front panel buttons will illuminate. When the Key Light feature is deactivated with the unit turned off and the ignition switch turned on, the front panel buttons will not illuminate. E - 10 Personal Text Message Press the MENU button you will see the "PTM" on the display , this will allow the user to input his favor . greeting note on the display. 20 letters or symbols for the "PTM" to be displayed on the LCD. [. . . ] When the desired track is reached, press INTRO SCAN BUTTON (INT) again to end the scan and play the selected track. CD TEXT The unit can display the first 11 letters of Album Title, Artist Title. PROGRAM CD MEMORY This unit allows you to program up to 20 CD tracks to play in any order. A CD must be inserted for this feature to work. Save a Track to Memory To add a track to memory, select the track you want to program, and then press and hold the BAND button for > 3 seconds. [. . . ]