User manual BOSS CE-5

[. . . ] Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). Do not stick paper or tape on the disc (P . 2). P5 . Do not use rental CDs with old labels that are beginning to peel off. P2 . Stickers that are beginning to peel away, leaving a sticky residue (P . 6). Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car (P . 3). ************** ******* ******* ******* Do not use your CDs with labels or stickers attached. Labels are attached (P . 7). ******* ******* ******* ******* ******* P7 . Wipe each disc from the centre out (P . 4). Be sure to use round shape CDs only for this unit and do not use any special shape CDs. [. . . ] Please read below for the details operation of this function: TRANSFERABLE MEDIA Files are transferable within the following media: Removable USB Stick SD Memory Card MMC Memory Card File on the CD disc MUSIC FORMAT SUPPORTED BY FILE TRANSFER ARE MP3 and WMA TRANSFER MP3 OR WMA MUSIC FILES ON CD DISC This operation only can be performed during disc playing a MP3 or WMA music file. 1. Playback a music file to be transferred and then long press the COPY button to activate the Transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. Once selected the storage media, Press AUDIO button as confirmation to transfer the Playing file. If no further button is press within a 10 second time out, the unit will automatically resume to the previous mode 4. If the unit detected the selected media memory capacity is used up, Will be displayed on the LCD for a while then automatically resume to the previous mode. 5. After pressing AUDIO button to start the transfer, the playing music file will stop and the transferring will start at the same time. (The following step is an example of if selected USB) 6. When the transfer is processing, the LCD will displayed . 7. When the file transfer is completed, the LCD will display for a while and automatically playback the present music file which have been transferred. The transferred music file is automatically saved as a file into Folder "MY_MP3" or " MY_WMA" by the advance "File Management. " system of this unit. Tips For more details information of File Management system of this unit. Under transferring mode, All the MP3/WMA operation is not functional, like file up / down, Repeat, Random, and Intro etc. Long press BAND button to activate the ERASE mode The LCD will display . You can rotate the encoder volume knob to select " " as to confirm the erase or rotate the volume knob to select " " as for cancel the erase mode. Once the " " is display on the LCD, press the AUDIO button again to final confirm erase the present playback music file. If want to CANCEL the erase of the present music file, Rotate the encoder volume knob to " ". Once the " " is displayed on the LCD, press the AUDIO button again to cancel the erase mode. After pressing AUDIO button to start the ERASE, the present playing music file will stop and the erasing will start at the same time. will display on the LCD after the music file erase is successful, and the unit will automatically start playback the next music file. 2. Erase under Files Number Search Mode User can select the Music file Number want to erase by file Number Search mode After selected the file number want to erase, Long press the BAND button to activate the ERASE mode. Short Press the AUDIO to enter into the ERASE mode Once enter into the erase mode. User can rotate the encoder to select " " to confirm the erase or rotate the volume knob to select " " to cancel the ERASE mode. Once the " " is displayed on the LCD, press the AUDIO button to final confirm to erase the selected music file. [. . . ] For the details operation of connecting with this unit, Please refer to the CONNECTING operation for more details. (2) Press MODE button repeatedly until "BT AUDIO" appears on the display. IMPORTANT: To listen Bluetooth audio streaming from the audio device, user MUST change the mode to "BT AUDIO" first. Any other mode of this unit is not able to activate the Bluetooth audio streaming ( A2DP ) function. If the audio device is the connectivity or no audio device is connecting with this unit, after mode changed to BT AUDIO mode, the display will show , and if after a 20 seconds time out still cannot find any audio device for connecting, the unit will display for 3 seconds thenturn to the Tunner Mode. (3) Once in the "BT AUDIO" mode, user can use the audio device to start playback the song via Bluetooth wireless with this unit. [. . . ]