User manual BOSS CD-3125R

[. . . ] Insert and tighten the "headless" support screw into the back of the head unit where shown. Inspect the dashboard material to determine its approximate thickness. Select the appropriate support tabs and bend them outward to secure the bracket in place (Figure 1). [. . . ] Press repeatedly to choose desired audio source (Radio, CD or AUX IN). Auxiliary input feature This CD Receiver features an Auxiliary Input jack on the back side of the unit. An external audio source such as a portable audio player or a DVD player may be connected via this input jack. CD3125R/MP3-3130R User's Manual - page 7 English Español Português Français Deutsch CD Playback Controls 1 2 3 4 5 6 CD Playback Controls CD OPERATION 1 TUNE/TRACK BUTTONS Press and release to advance to the next track or to return to the beginning of the current track (track number will be displayed). Play will begin at the point when you release the button. TO PLAY A CD gently insert a CD with the label side up into the disc slot. TO EJECT A CD press EJECT to stop the CD playback and eject the CD from the slot. TO SKIP TRACKS press the I<< or >>I key to choose the next or preceding track. TO FAST FORWARD OR REVERSE press and hold the I<< or >>I key to access the desired location on the disc. TO REPEAT A TRACK press REPEAT to continuously repeat the current track. TO PREVIEW ALL TRACKS press CD SCAN to play the first several seconds of each track. TO PLAY TRACKS IN RANDOM ORDER press and hold SHUF for several seconds. Press again to cancel this function. 2 PAUSE Press to pause CD playback. Press again to resume playback. 3 CD SCAN Press to audition the first several seconds of each track on the current disc. Press again to remain on the track currently playing. 4 REPEAT Press and release to repeat the same track. Press again to cancel the repeat function. 5 SHUFFLE Press to play ALL tracks on the CD in random order. 6 EJECT Press to eject the disc. CD3125R/MP3-3130R User's Manual - page 8 English Español Português Français Deutsch Controls behind the faceplate 1 RELEASE 3 2 1 CD LOADING/UNLOADING SLOT 2 LED This LED flashes when the faceplate is removed. 3 RESET BUTTON Press this button with a ballpoint pen or other thin object. Use it: a) after initial installation of the unit, when all wiring is complete b) when the function buttons do not operate c) when the display is shows "ERROR" NOTE: If the unit does not function properly after you have pressed the RESET button, clean the socket and the connector on the rear of the front panel with a cotton swab soaked in isopropyl alcohol and try again. CD3125R/MP3-3130R User's Manual - page 9 English Español Português Français Deutsch MP3 Playback (MP3-3130R only) Since MP3 files are named and accessed differently than CD files, it is necessary to employ some of the buttons for purposes of searching for and selecting audio files. [. . . ] Front panel is not properly fixed in place. Adjust volume to desired level. Check wiring connections. Adjust installation angle to less than 30º from horizontal. Press the RESET button. Remove front panel, press RESET button, and re-insert front panel. [. . . ]