User manual BOSS CAP2R

[. . . ] Failure to observe this may cause malfunction due to the precise mechanism of this unit. Use Authorized Service Centers Do not attempt to disassemble or adjust this precision product. Please refer to the Service Center list included with this product for service assistance. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. [. . . ] DVD: Normal Playback X2 X4 X16 X100 Skipping Track Press / buttons on the remote control during playback. Note: For some VCD2. 0 discs (PBCplayback control), / buttons may be unavailable. Slow Motion Play During playback each time / button is pressed, the speed of slow forward/ reverse changes according to the disc as follow. (Note:Only for the DVD disc ) DVD: Normal Playback 1/2 1/32 1/4 1/16 1/8 Pause (still picture) Pressing on the remote control during playback will pause the playback. And you can press and hold button on the front panel for several seconds to pause the playback, Press and hold it again will return to normal palyback. VCD/CD/MP3: Normal Playback X2 X4 X8 20 SETUP REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 2)For different kinds of disc, pressing RPT button has different effects. Chapter Track bookmark. 2) If you want to watch the section that you just set a bookmark, press GOTO button, then press / buttons to move the cursor to the desired number of the bookmark, and press or OK button on the remote control or ENT on the front panel to confirm. 12345---- Title All Off Off DVD Note: REPEAT feature does not support VCD2. 0 (with PBC ON). A-B Paragraph Repeat Play: When you want to repeat playing a desired paragraph. required passage. A- VCD/SVCD CD/MP3/ WMA 2) Press A-B button secondly at the end of the passage. A-B 3) Then the unit will repeat playing the passage you just set from A to B. NOTE: You can press BOOKMK button repeatedly to set 9 bookmarks, Then press GOTO button and use / and /OK /ENT to confirm the track you have marked. CLEAR button on the remote control to clear the bookmark you have set. Press ZOOM on the remote control to toggle among 400% scale, 1600% scale. Each time the button is pressed, the audio soundtrack language changes on sequential order. - When no different language soundtrack will be displayed at are recorded, screen left top corner. It is possible to switch the sound between monaural and stereo sound. MONO LEFT MONO RIGHT STEREO CD: (1) Press DSP for the first time: REPT ALL (2) Press DSP for the second time will display the elapsed time of the disc: 00 : 02 : 39 (3) Press DSP for the third time will display the clock: 00 : 23 (4) Press DSP for the fourth time, The message on the screen will resume: CD T 08 VCD: (1) Press DSP for the first time will display the elapsed time of the disc: 00 : 03 : 31 (2) Press DSP for the second time will display the clock: 01 : 03 (3) Press DSP for the fifth time: The message on the screen will resume: VCD T 01 TITLE menu function (For DVD Only) If the DVD has multiple titles recorded on the disc. Press the cursor button shown in display, select preferred title by the cursor button and confirm by OK button. ON-SCREEN DISPLAY FUNCTION Press the CONS button during playback to display the console information of the current disc on the screen. For DVD 1/17 2/32 0:01:45 1. ENG D 3/2. 1 OFF 1/1 Normal Sound Move Select DVD: (1) Press DSP for the first time: DVD T (2) Press DSP for the second time will display the clock: 24 SETUP 1) 1/17 6) 1/1 Item: Title Function: Display the current title number and the total title number; it can skip to the desired title number. Method: / buttons or use numeric buttons to input and confirm with OK button on the remote control or ENT button on the front panel. 2) 2/32 Item: Angle Function: Display the current angle; it can switch to other angle. 7) Normal Item: Chapter Function: Display the current chapter number and the total chapter number; it can skip to the desired chapter number. Method: / buttons or use numeric buttons to input and confirm with OK/ENT button. 3) 0:01:45 Item: Sound Function: Display the current sound mode; it can switch between normal and 3D surround effect mode. [. . . ] The detail operation is: When you first set this item, it will display "NEW" and require you to input a new password, then input the password again to confirm it. Then the first character of the country code will be selected, you can use / buttons to select upward or downward to confirm the first character; When you confirm the first character, the second character will change into all the characters that may match with the first character to stand for the corresponding country code; Then use / buttons to select the second character; Press ENT or OK to confirm the setting for country code. Note: If you have set a password in "Rating" and "Password", when you set the country code, it will require you to input the password. Only when the password is correct, can you be permitted to change the country code. [. . . ]