User manual BOSS BV9985

[. . . ] 00 Contents 1 Before You Start Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11 5 2 Installation Wiring Connections 12 Install the Unit 13 Detach the Unit 14 Install the Front Panel 15 Detach the Front Panel 15 3 Common Operations Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics EQ Setting 16 Turning Loudness On/Off 16 Eject a Disc 17 Open the Monitor 17 Angle Setting 17 Mute Function 17 Clear 17 Mode Selector 17 Menu Setup Button 17 Infrared Sensor 17 Eject a Disc 17 16 Playing a DVD 23 DVD Setup 23 Selecting Tracks Fast 23 Stop the Playback 23 Pause the Playback 23 Skip Backward/Forward/F. F/F. REW the Playback 23 Number Buttons 23 Repeat Playing 23 System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 24 Changing the Viewing Angle 24 Changing Audio Language 25 Changing the Subtitle Language 25 Selecting Menu 25 DVD Setup Menu 25 DVD 6 4 5 Main Menu Main Menu Setup 18 Audio Adjust 18 Video Adjust 19 Source Setup 19 Others 19 2 Playing a MP3/USB/SD Disc 32 Selecting Tracks Fast 32 Repeat Playing 32 Number Buttons 32 Stop Playing 32 Selecting Tracks 32 Pause the Playback 32 Skip Backward/Forward/F. F/F. REW the Playback 33 On Screen Display 33 Exit an USB 33 Exit a SD Card 33 MP3/USB/SD 7 Playing a VCD/CD Disc 34 Selecting Tracks Fast 34 Repeat Playing 34 Playing Tracks at Random 34 Number Buttons 34 VCD/CD 12 Additional Information Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . Contents 00 Problem No power. Some errors occur in the LCD or no function when pressing the button. Unable to receive stations. Poor effect on receiving a station. CDs cannot be loaded. . Cause/Solution Check and make sure whether the fuse is blown, replace with the proper value if necessary. [. . . ] Note: * Press 7 in the monitor to enter RDS SETUP. Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6. 40 9 01 Before You Start SOURCE/PWR GOTO (playing time/track) BAND/TITLE AMS/MENU (Previous/Next Track) LOC/SUB -T ST/AUDIO (mono or stereo/language or channel selector) PTY/ANGLE TA/LOUD (traffic alarm/loudness) OSD Briefly press it to show the current information, press and hold it to set the current information. ZOOM (to increase the picture) BT (bluetooth mode) Button SLOW (Slow Forward/Reward) P/N( system adjusting) (Dial, last phone, answer a phone) Mute (Hang up/refuse a phone) PROG(Program playing) 30 Tuner (Pause/Play) (Stop Playing) 09 Band Selector During radio status, repeatedly press 3 BAND button to select bands in the following order: 4 Listening to the radio 1 FM1 2 CH:1 3 87. 50MHz SETUP (F. R/F. F) FM1 AM2 FM2 FM3 AM1 87. 50M 87. 50M 107. 90M 106. 10M 5 90. 10M 98. 10M CLEAR 0~9 (Number) Buttons (Eject Button) Note: * Press BAND on the head unit or 6 in the monitor performs the same function. 9 6 8 10 7 Manual/Automatic Tuning Manual Tuning: Press ( or ) button on the remote control continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold ( or ) button for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station. Note: in the * Press / on the head unit or monitor performs the same function. 1 Band Indicator AF/EQ (alternative frequency/equalizer) Button ENTER (Left/Right/Up/Down ENTER) Shows which band the radio is tuned to. 2 Preset Number Indicator Shows what preset has been selected. 3 Frequency Indicator Shows which frequency the tuner is tuned. 4 SEEK+/SEEK- PAIR During bluetooth, press it to pair. Briefly press to tune by the presettable range, hold and press to tune automatically. 5 The 6 stations of the current band. DX/LOC Selector During radio status, press 5 LOC button to select strong or weak station reception. LOC OFF appears on the display both distance and local stations can be received. Note: * The function is only valid on remote Briefly press to select station, hold and press to save the current station to one of the 6 stations. 6 BAND VOL+/VOL-/SEL RPT(Repeat Playing) RDM (Playing Tracks at Random) To select the bands. 7 RDS Press it to enter RDS SETUP. 8 MENU control. * The function is invalid in AM tuning. Press this button to set the main menu. 9 SRC Selecting the Stored Station During radio status, press 27 button to select the stored station upward, press to select the stored station downward. Note: * The function is only valid on remote control. 39 Press this button to select the signal source. 10 BLUET Press this button to switch to the bluetooth interface. 10 08 MP4(AVI, MPEG4) Note: * The function is only valid on remote Before You Start Specifications General AM Tuner Section 14. 4V DC (11-16V allowable) Frequency Range (Optional) 522-1620(KHz) (Europe) 530-1710 (KHz) (U. S. A. ) IF Range 450KHz 01 Selecting Tracks Fast During MP4(AVI, MPEG4) playback, first press 21 to return to the beginning of the current track, press 21 again within 3 seconds to play previous track , press 21 to play next track . Note: control. * To remove the image by pressing 27 button. Changing audio language (Multi-audio) With MP4(AVI, MPEG4) disc featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: AUDIO 1 AUDIO 2 AUDIO 3 . . . . . . Power Requirement Load Impedance Max. Power Output Tone Controls * Pressing and button on the head unit or and in the monitor also performs the same function. 85W x 4 10dB Bass 100Hz Treble 10KHz Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. Each pressing will change as follow 2X Note: 4X 8X 16X Usable Sensitivity 32dBuV (-20dB) Note: Dimensions TFT Sizes * Press and hold and button on the head unit or and in the monitor also performs the same function. * This function is operated by using the remote control. * This function only operates with disc featuring multi-audio recordings. * The number in the 2 mark on a disc package indicates the number of recorded languages/audio systems. Approx. 160x178 x 50 mm (d/w/h) Approx. 170 x 117. 5x16. 5 mm (d/w/h) DVD/VCD/CD Player Section VCD Signal System Frequency Response Signal-to-noise Ratio Separation Distortion AUTO/PAL/NTSC 20Hz to 20KHz 60dB 55dB(1KHz) 1% Angle between 30~100 folded and unfolded Weight Approx. 2. 3kg Playing Tracks at Random During MP4(AVI, MPEG4) playback, press 16 RDM button on the remote control to play any track at random under the directory which you select. Press it again to cancel this function. Note: Changing the subtitle language (Multi-subtitle) With MP4(AVI, MPEG4) disc featuring multi-subtitle recordings. You can press 5 SUB-T to switch between subtitle languages during playback. Subtitles OFF FM Section Tuning Range (Optional) 87. 5-108(MHz) (Europe) 87. 5-107. 9(MHz) (U. S. A. ) IF Range Usable Sensitivity (-30dB) 10. 7MHz 10dBuV Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. * The function is only valid on remote control. Note: Increase the size of the picture During MP4(AVI, MPEG4) mode, Press 9 ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached. 2X 3X 4X * This function is operated by using the remote control. * This function only operates with disc featuring multi-subtitle recordings. * The number in the 2 mark on a disc package indicates the number of recorded subtitle languages. Signal-to-noise Ratio 50dB Stereo Separation Frequency Response 30dB 1KHz 20Hz-10KHz No Change 38 11 02 Installation MP4(AVI, MPEG4) Basic Operation of Mp4 (Brown line with brown head) 08 Press and hold 8 OSD LCD displays the current time. Note: Wiring Connection (Grey line with Video Out 2 yellow head) (Grey line with Video Out 1 yellow head) (Light Grey line with Rear Wire Out red & white head) Subwoofer Reverse Video(Brown line with yellow head) Input Bluetooth Phone (Black line with black head) Insert a MP4(AVI, MPEG4) disc into the slot, the unit will automatically switch on, if a disc is loaded, press 1 SOURCE to start the playback. Note: * You can press EJ button on the head unit * This function is operated by using the remote control only. Front Wire Out (Dark Grey line with red & white head) Repeat Playing During MP4(AVI, MPEG4) playback , press 15 RPT to perform replaying function, first press it to replay the current track, press it again to cancel this function. Note: to eject the MP4 disc. Number Buttons Antenna 4 3 5 1 6 you can select any tracks directly by using 23 Number Buttons( 0~9). The track you selected will be played automatically. Note: * This function is operated by using the remote control only. 2 * This function is operated by using the remote control only. Setting the Playback Time During MP4(AVI, MPEG4) playback, first press 2 GOTO, and monitor shows select : --- , press your desired time of the playback by using number buttons. Secondly press GOTO button, and the monitor shows: -:--:--, input your desired time, then press ENTER. Note: Stop the playback Orange Brown Red Yellow Black FILTER &FUSE BOX Reverse Gear Ignition Key Constant 12 Volts Ground Rear L Speaker Front L Speaker Parking Brake Lamp In Antenna Power + Rear R Speaker Front R Speaker Pink Blue Violet/Black Violet Grey/Black Grey 4 5 6 During MP4(AVI, MPEG4) playback, first press 18 to pause playing, then press 17 to play from the beginning of the disc, During stop status, press pause to resume playing state. Note: Green/Black Green White/Black White 1 2 3 * Press in the monitor performs the same function. * This function is operated by using the remote control only. Pause the Playback During MP4(AVI, MPEG4) playback, press 17 button to suspend the playback, Press it again to return to normal playback. Note: Slow motion playback During MP4(AVI, MPEG4) mode, press SLOW to slow forward or slow backward. There are speeds as follow: 1/ 2 1/ 4 1/8 1/16 Antenna Receptacle Output Plug(Male) Output Socket(Female) Screw Hole Wire Clip Fan Window * Press 3 on the head unit or in the monitor performs the same function. On Screen Display Press 8 Note: Note: * OSD button the display shows: Single remain time OFF This wire must be connected to the (-) negative side of the parking brake system of your vehicle. Once you engage the parking brake system, you will be allowed to watch the video. Do not connect the pink wire to the battery, otherwise it will use up the power of battery. 12 * This function is operated by using the remote control only. Single elapsed time 37 07 VCD/CD Program Playing During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move the cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page. During this process, press 18 to cancel the program playing. Note: Installation Install the Unit Main Parts List 02 Selecting Channel During VCD status, repeatedly press 6 AUDIO button to select the following channel: Stereo Mono Right Selecting the corresponding channel to set the different sound characters. Note: Mono Left M4x3 &M5x5 £p £p Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 6 * This function is operated by using the remote control only. 4 Screws Each PBC Selector During VCD status, first press 3 TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. And then you can select your desired track by using 27 or . 23 When a track is playing, you can press MENU to return to the menu, if you would like to end the track and select others. [. . . ] 2 Selecting Title: During DVD status, press 3 TITLE to return the title menu, all of the titles will appear on monitor. You also can press 27 or 23 button to select your desired chapter. Note: Changing audio language (Multi-audio) DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: AUDIO 1 AUDIO 2 AUDIO 3 . . . . . . NTSC * This function is operated by using the remote control only. DVD Playback Setting During DVD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/audio/subtitle/angle /title time/chapter time/repeat /time disp. [. . . ]