User manual BOSS BV9600

[. . . ] Press RESET button. Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly. Make sure the antenna is fully extended; if broken, replace the antenna with a new one. The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location. Set the color system to PAL or NTSC according to the connected television. Note: If any of the problem persist after check list had been made, consult your nearest service dealer. [. . . ] (Shown as the picture) On Screen Display During radio status, keep pressing 8 OSD to display the current mode; briefly pressing it to switch between RDS setup and preset frequencies. Note: * Press the DISP button on the head unit performs the same function. Clean the discs with an optional cleaning cloth. (Shown as the picture) Besides playing the discs above, the unit also can be connected to CD Changer and other connector. 36 5 01 Before You Start Tuner Listening to the radio 2 3 87. 50MHz 08 FM1 LW FM2 MW2 (For Three Bands) Note: Maintenance Replacing the Fuse Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. In such cases, please consult to the nearest service dealer. ! FM3 MW1 1 FM3 MONO P. CH:1 6 Insert the Battery Holder into the Remote Control. P1:87. 50MHz P2:90. 00MHz P3:87. 50MHz P4:87. 50MHz P5:87. 50MHz P6:87. 50MHz EQ. OF F LOUD. OFF * Press BAND on the head unit performs the same function. Manual/Automatic Tuning Manual Tuning: Press ( or ) button on the remote control continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold ( or ) button for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station. Note: * Press and button on the head unit performs the same function. 4 5 1 Band Indicator Shows which band the radio is tuned to. 2 Preset Number Indicator Warning Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit. Precautions on Using Lithium Battery Always keep the lithium battery beyond children s reach. Cleaning the battery with a dry cloth, to ensure its perfect connected. To prevent short circuit, do not use metal tweezer to clip the battery. Shows what preset has been selected. 3 Frequency Indicator Shows which frequency the tuner is tuned. 4 EQ Indicator Replacing the Battery When the range of the operation of the card remote control becomes short or no functions while operating. Make sure the battery polarity before replace. Gently pull out the Battery Holder while pressing the Stopper. Shows the EQ Setting of the radio. 5 MBP Indicator DX/LOC Selector During radio status, press 5 LOC button to select strong or weak station reception. when it disappears both distance and local stations can be received. Note: * The function is only valid on remote control. * The function is invalid in AM tuning. Shows that MBP is on or off. 6 The 6 stations of the current band. Band Selector !(Press , or , then press ENTER) --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Change Password Auto Eng Eng Eng Change 28 13 03 General Operations Setting the Sound Characteristics Repeatedly press 14 SEL button to select the desired mode in the following order: DVD ---Preference page--- 05 Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then Press 9 RESET button on the base with a pointed object, (such as a ballpoint pen) to set the unit to initial status. Note: * When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions. * This function can only be operated by the head unit. TV Type VOL TRE BAL FAD BAS Example showing how to set TV type: (Press , or , then press ENTER) (Press --Preference Page-- --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Set TV Standard Auto Eng Eng Eng PAL Auto NTSC After selecting the desired mode, you can adjust the current level by pressing 14 VOL buttons. Note: * Pressing 7 button and rotating it on the head unit also performs the same operation. TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng EQ Setting While listening to the popular music, classic music or rock music, you can select the corresponding preset modes to adjust the sound quality perfectly by using 26 EQ button. Repeatedly keep pressing 26 EQ button to 3 choose the following modes in turn: POP EQ OFF CLASSICAL ROCK Turning the Unit On/Off Press 1 PWR button to turn on the unit, press it again, the unit is still in the waiting status. Keep pressing it more than 0. 5 seconds to turn off the unit completely. Note: Audio (Press Example showing how to set Audio language: (Press , or , then press ENTER) --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Auto Eng Eng Eng English * Pressing SRC button on the head unit also performs the same operation. * During playback status, it will play automatically after inserting a disc. The default setting is OFF. Note: Preferred Audio Language * Pressing EQ button and rotating it on the head unit also performs the same operation. Volume Control Press 14 VOL+ button to increase the sound level and press 14 VOL- button to decrease the sound level. Note: Turning Loudness On/Off ¼ò¹ÊÅÅÖ¸ÄÏ µ¥Õϳý Subtitle (Press Example showing how to set subtitle language: (Press , or , then press ENTER) keep pressing 25 LOUD button activate loud function. You can press this button to increase the low frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function. Note: * Pressing LOUD on the head unit performs the same function. --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Auto Eng Eng Eng English Off * Rotating 7 on the head unit also performs the same operation. Preferred subtitle Language 14 27 05 DVD General Operations Eject a Disc Press Note: 03 --Dolby Digital Setup-- ¼ ò ¹ Ê Å Å Ö ¸ Ä Clear µ¥Õϳý Ï EJ button to eject or insert a disc. If input some wrong selection, press 22 CLEAR button to clear it. Note: * This function is only valid on remote control. * Pressing on the remote control performs the same function. Dual Mono (Press Example showing how to set stereo mode: (Press , or , then press ENTER) --Dolby Digital Setup-Dual Mono Dynamic --Dolby Digital Setup-Dual Mono Dynamic Stereo L-Mono R-Mono Mix-Mono Open the Monitor Press OPEN button to slant the monitor, press and hold it again, the monitor will return to initial status. . Note: * Pressing on the remote control performs the same function. Mode Selector Repeatedly briefly pressing 1 SOURCE button to select radio mode or playback mode. Note: Go To Dolby Digital Setup Dual Mono (1+1) Setup * Briefly pressing SRC on the head unit also performs the same operation. Dynamic (Press Example showing how to set dynamic range compression: (Press , or , then press ENTER) * The unit is running after the monitor telescopes into. Menu Setup Button During DVD MENU SETUP/RADIO MENU SETUP mode, press on the remote control to select the option, then press ENTER to enter. You also can press and to select the menu, press MENU to enter, and press EXIT to back out the previous menu. Angle Setting Press 5 and 6 to adjust the best position of the monitor. [. . . ] * The number in the 2 mark on a DVD's package indicates the number of recorded languages/audio systems. DVD SETUP MENU Briefly press SET UP on remote control or press and hold MENU on the head unit, main menu and sub-menu will appear on TFT, pressing [ ][ ][ ][ ] on remote control or [ ][ ][ ][ ] on head unit to select your desired items, then press ENTER on remote control or on head unit to confirm. Press EXIT to back out. Notes: Changing the subtitle language (Multi-subtitle) Setting the AUX on or off in this menu , the default is ON. Press [ ] firstly, then press [ ] , press ENTER lastly. With DVDs featuring multi-subtitle recordings. You can press 5 SUB-T to switch between subtitle languages during playback. [. . . ]