User manual BOSS BV8860B

[. . . ] BV8860B Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Touch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Unit Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Audio Quality Adjustments . . . . . . . . . . . . . . . 17 Setting Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reset Factory Settings . . . . . . . . . . . . . . . . . . 18 Radio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Listening to the radio . . . . . . . . . . . . . . . . . . . . . . [. . . ] ( Or touch the screen the 1-6 sections ) FLAT ST 12:06 TA NO-DISC DX automatic station storage. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . FM1 MODE 1 2 3 SEL 87. 60 MHZ MUTE ON 4 5 6 Scan Function In Radio mode, briefly touch the APS section on the touch screen , the radio briefly plays all the preset stations of the frequency band . APS VOLUME- VOLUME+ Touch to preset station With this system, a total of 30 stations can be stored in the memory of six buttons. The operation is as below : -Store in Memory Touch and keep the 1-6 sections (or press and hold the / CH 1-6 ) for about 2 seconds, the current listening station will be stored into the number location . -Retrieve a preset station Touch the 1-6 sections briefly (or press the / CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display . RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : FLAT ST 12:06 NO-DISC AF DX FM1 TA CLOCK 87. 60 MHZ AF LOUDNESS PTY LOC Touch to select TA Traffic Announcement (Priority For Traffic Information) In Radio mode, touch briefly the screen of "TA" range to activate the TA function. When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. TA Automatic Memory Storing & Program Scanning Automatic Preset Setup APS In Radio Mode, Touch and keep the APS section on the touch screen for about 2 seconds to active -20- Radio Operation When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. PTY FUNCTION Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode . PTY Note : the status of the AF function is shown by an AF symbol in the display. If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment . In Radio mode, touch the screen of "PTY" range to select the Program type . AF FUNCTION (Alternative Frequencies) In Radio mode, touch briefly the screen of "AF" range to activate the AF function. AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into . AF PTY Selection of the program type besides the stations name, some FM stations also transmit information on the type of program. With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message "PTY SEEK" then appears briefly in the display . When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, "NO PTY" appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode . Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. [. . . ] Changing From DISC to USB Playback Modes If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touch or press the GOTO to USB playback. If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback. Changing From USB to DISC Playback Modes If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode. Important Note: you can also select the desired item of the USB device . [. . . ]