User manual BOSS BV8855T

[. . . ] BV8855T Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Touch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Unit Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Audio Quality Adjustments . . . . . . . . . . . . . . . 17 Setting Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reset Factory Settings . . . . . . . . . . . . . . . . . . 18 Radio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Listening to the radio . . . . . . . . . . . . . . . . . . . . . . [. . . ] The information will display in the monitor as follow : DSP USA/EURO FREQUENCY SWITCH On the right of this device, there is a USA/EURO frequency switch, you can select the desired radio frequency before installing . POP FLAT FLAT ROCK JAZZ CLASSIC 16: 18 DISC-IN POP USA/EURO Frequency Switch (radio frequency switch for selecting between the USA and EUROPE frequency band. ) S-WOOFER OSD TA DSP AF CLK LUD GOTO touch to select It`s depend on your habit to select the Audio mode . Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. RES RESET -18- Radio Operation Listening to the Radio Switching To Radio Mode Touch the screen of "MODE" range (or press the MOD button on the front panel ) repeatedly to select the RADIO mode. the following information will appears as below: MODE Start Searching For a Station Manual Search During Radio mode, briefly touch the screen of " " section or press the " " on front panel to increase frequency by one step of channel spacing . Briefly touch the " " section or press the " " button on the front panel to decrease frequency by one step of channel spacing . FLAT ST 12:06 NO-DISC DX Automatic Search During Radio mode, touch and hold (for more than 2's ) the screen of " / " section or press longer the " / " on the front panel to start search for a radio station automatically . FM1 MODE 1 2 3 SEL 87. 60 MHZ MUTE ON 4 5 6 VOLUME- VOLUME+ FLAT ST 12:06 NO-DISC AF DX When an FM stereo broadcast is hard to receive Touch the "STEREO/MONO" section on touch screen (or press ST/MO button on the remote control ) to select the MONO or STEREO mode . ) FM1 BND TA PTY AF CLK 87. 60 MHZ S-WOOFER LUD APS LOC/DX DSP STEREO/MONO Touch " Touch " " to next . " to previous . To tune in strong-singnal FM Station only (LO/DX function) Touch the " LOC/DX " range on the touch screen (or press LO/DX button on the remote control ) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . ) Selecting The Frequency Band BND Touch the screen of " BND " section (or press the BND on the front panel ) repeatedly to select the band , the message will show in turn : FM1 FM2 FM3 AM1(MW1) -19- AM2(MW2) Radio Operation Storing Stations In Memory Setting Memory Press the " / CH 1-6 " button repeatedly on the front panel to preset stations at radio mode . ( Or touch the screen the 1-6 sections ) FLAT ST 12:06 NO-DISC DX automatic station storage. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . FM1 MODE 1 2 3 SEL 87. 60 MHZ MUTE ON 4 5 6 Scan Function In Radio mode, briefly touch the APS section on the touch screen , the radio briefly plays all the preset stations of the frequency band . APS VOLUME- VOLUME+ Touch to preset station With this system, a total of 30 stations can be stored in the memory of six buttons. The operation is as below : -Store in Memory Touch and keep the 1-6 sections (or press and hold the / CH 1-6 ) for about 2 seconds, the current listening station will be stored into the number location . -Retrieve a preset station Touch the 1-6 sections briefly (or press the / CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display . RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : FLAT ST 12:06 NO-DISC AF DX FM1 BND TA PTY AF CLK 87. 60 MHZ S-WOOFER LUD APS LOC/DX DSP STEREO/MONO TA Traffic Announcement (Priority For Traffic Information) In Radio mode, touch briefly the screen of "TA" range to activate the TA function. When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. TA Automatic Memory Storing & Program Scanning Automatic Preset Setup APS In Radio Mode, Touch and keep the APS section on the touch screen for about 2 seconds to active -20- Radio Operation When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. PTY FUNCTION Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode . PTY Note : the status of the AF function is shown by an AF symbol in the display. If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . [. . . ] REPEAT play modes are also available by repeatedly pushing REPEAT until the desired mode is found. TV MODE MUTE ON FINE+ VOLUMESEL FINEVOLUME+ 02 Changing From USB to DISC Playback modes If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode. -33- FLAT 12:16 DISC-IN TV SEARCH 0 1 6 2 7 SKIP 3 8 4 9 02 LOUDNESS 5 Other Main Operation FLAT 12:16 DISC-IN Fine Tuning 02 Touch the "FINE+/FINE- " section on the touch screen (or press / button on the remote control ) to fine tune the current channel . TV TA AF CLK LUD DSP Channel ADD/DEL SKIP Touch " Touch " " to next . " to previous . In TV mode , after search channel automatically, when you want delete the no sign channel, Auto searching TV channels SEARCH Touch the screen of " SKIP " range or press the SKIP button on the remote , the screen display SKIP , the channel will be deleted. [. . . ]