User manual BOSS BV8212T PART 1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSS BV8212T. We hope that this BOSS BV8212T user guide will be useful to you.


BOSS BV8212T PART 1: Download the complete user guide (5673 Ko)

You may also download the following manuals related to this product:

   BOSS BV8212T PART 2 (6346 ko)
   BOSS BV8212T PART 2 (6346 ko)

Manual abstract: user guide BOSS BV8212TPART 1

Detailed instructions for use are in the User's Guide.

[. . . ] To drop/take away/install and recover front panel, see the B picture. BASIC INSTALLATION C Note that the installation show is a typical example. For some car types you may need to make adjustments or modification to make adjustments or modification to install the unit. If your car is of such type, consult you nearest Boss Audio car audio dealer. Mounting-angle adjustment The mounting angle should be 30 degrees or less from horizontal. [. . . ] a (Not supplied). C 3 a 4 12 1 WIRING INSTRUCTION Speakers Connection This unit can be wired up to 4 speakers. Make sure that you check all connections before powering up this unit. MP3 PLAYER OPERATION Root Folder Navigate Press AS/PS three times to navigate from the root folder. The root folder name is briefly displayed, after which the first track or subfolder name is displayed. Press " " (or turn rotary encoder to the down) first, to preview the desired track or subfolder. NOTE: " " must be pressed first (or turn the rotary encoder encoder to the down) to continue navigating. Press BAND/LOUDNESS first, then " " (or turn the rotary encoder to the down) to begin navigating the selected subfolder. NOTE: " " must be pressed first (or turn the rotary encoder to the down) to navigate within the subfolder. After the current folder name is displayed, the currently playing track name is displayed. Press " " (or turn the rotary encoder to the down) first, to preview the desired track or subfolder. NOTE: " " must be pressed first (or turn the rotary encoder to the down) to continue navigating. If a subfolder is selected, two "\\" will illuminate in the LCD. If your car has a power antenna, this wire will turn it on. ) Pink (Power amp remote control) - - - - Step4 Step5 CONNECTIONS PRECAUTIONS PRECAUTION ON MAKING CONNECTIONS Before connecting, make sure that the ignition switch is set to OFF. And remove the ground terminal of the battery to protect the unit and your car from damage. F 4-SPEAKER CONNECTIONS Note Speakers with an impedance of 4 to 8 ohms and with adequate power handing capacities. DO NOT connect the terminal of the speaker system to the car chassis. 10 3 CONTROL LOCATIONS 1 2 3 4 BUTTON FUNCTION DISPLAY When pressed short, it is activated as "CLOCK" key. When pressed long with displaying CLOCK, "CLOCK ADJUST" mode is activated for few second. During clock adjust mode, hour is adjusted by "T- UP" key and minute by "T-DN" key. Press SELECT button, VOLUME MODE is switched on: VOLUME/BASS/TREBLE/BALANCE/FADER VOLUME 1. Press SELECT button once display shows VOL. 2. To adjust BAS level, the VOL up or down. MODE 21 20 19 5 6 7 8 9 SELECT/ VOL UP/ VOL DOWN 18 17 16 15 14 13 12 11 10 TREBLE 1. Press SELECT button three, display shows TRE. OPEN 10 1 MODE (REMOTE CONTROL 4 ) 2 DISC SLOT BUTTON 3 LCD WINDOW 4 EJECT 5 POWER (REMOTE CONTROL 1 ) 6 AS/PS (REMOTE CONTROL 5 ) 7 T-UP/DOWN 12 13 14 15 16 17 M5/D-DOWN (REMOTE CONTROL 12 ) M4/SHUFFLE (REMOTE CONTROL 8 ) M3/REPEAT (REMOTE CONTROL 9 ) M2/INTRO (REMOTE CONTROL BAND/LOUDNESS (REMOTE CONTROL 6 ) DISPLAY (REMOTE CONTROL VOL-UP/VOL-DOWN (REMOTE CONTROL 2 ) SELECT CONTROL BUTTON (REMOTE CONTROL 17 ) OPEN ) 13 ) M1/PAUSE (REMOTE CONTROL 14 ) Press the OPEN to allow the front panel to fold down. 1. CDP MODE As lift indication, pause, intro, repeat, shuffle of CDP is selected. When pressed M2~4 short, INTRO, REPEAT, SHUFFLE function in whole disc is selected. (REMOTE CONTROL 3 ) 8 RELEASE 9 AUX IN 10 11 18 19 CD FUNCTION MUTE (REMOTE CONTROL 18 ) 11 20 M6/D-UP (REMOTE CONTROL ) 21 Superior anti-shock performance (CD-45'S MP3-100'S) Superior disc reading ability: Able to read CD/MP3 Superior ECC(error correction code) capability Color LCD display(black mask) 4 9 Press the OPEN to allow the front panel to fold down. BUTTON FUNCTION RELEASE MUTE Press RELEASE button to allow the front panel to detachable. The releasing mode of the mute state is when any key is pressed again. REMOTE CONTROL BUTTON LOCATIONS M1(PAUSE) M2(INTRO) M3(REPEAT) M4(SHUFFLE) M5(D-DOWN) M6(D-UP) 1)RADIO MODE. [. . . ] M1~M6 -PRESET MEMORY is loaded when key is pressed for less than 1 second. -PRESET MEMORY is saved when key is pressed for longer than 1 secretary. TOP -First song will play when Top key is pressed for longer than 0. 5sec during play. During INTRO ON, INT indicator comes on and begins playing the first 10sec of each song, until the last song is played, It begins playing the entire track from where INT started. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSS BV8212T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSS BV8212T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.