User manual BOSS BV7970

[. . . ] 18 Radio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Listening to the radio . . . . . . . . . . . . . . . . . . . 1 9 Storing stations in memory . . . . . . . . . . . 1 9 Listening to a preset station . . . . . . . . . 24 AUX Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 On-Screen Disc Operations . . . . . . . . . 26 In-Dash AM/FM DVD/MP3/CD Receiver With 4. 3 Widescreen TouchScreen TFT Monitor With Built - in TV Tuner and USB Port DISC Special Functions . . . . . . . . . . . . . . . . [. . . ] Touch it again, the minute will flash, then use the VOL+/to adjust . TV RADIO Setting The Buzzer ON/OFF Volume Adjusting Volume button Buzzer A Revolve : clockwise to increase / Anticlockwise to decrease . Touch the SEL section on the touch screen to select the BUZZER item, and then touch the VOL+/- (or rotate the vol+ /vol-) to switch the BUZZER ON/OFF . Setting Blue-tooth ON/OFF SEL B Press the VOL+/- on remote control , to change the volume level . 16 Touch the SEL section on the touch screen to select the Blue-tooth item, and then touch the VOL+/- (or rotate the vol+/-) to switch the Bluetooth ON/OFF . Basic Operation TFT Monitor Adjustment During DISC playback, use your finger touch briefly the SEL section on the screen (or press SEL button on front panel ) to across the Picture mode selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Rear View Camera When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only. ) Audio Quality Adjustment During DISC playback, use your finger touch briefly the SEL section on the screen (or press SEL button on the front panel ) to across the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Bass Treble Balance DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ touch to select touch to adjust Buzzer Volume Bass Treble Balance Tint Contrast Bright Fade Color Buzzer Tint Contrast Bright Fade Color DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color fo the picture-lighter or darker. -Adjustable when " NTSC " is selected for " NTSC/PAL " . 17 touch to select touch to adjust It`s depend on your habit to setup the data . ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . Basic Operation Balance: R 0-10 to L 0-10 . Initial installation of the unit when Adjust sound balance between left all wiring is completed. When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . AF FUNCTION (Alternative Frequencies) In Radio mode, touch the AF section briefly (or swing and hold the SEL knob in the TA/AF direction) , to activate the AF function. AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into . AF minutes in the case of weak signals. Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message "NEW FREQUENCY " is displayed for one or two seconds. Note : the status of the AF function is shown by an AF symbol in the display. If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment . [. . . ] 2. Touch the MOD section on the touch screen (or press the mode button on the remote to select the TV mode. The message will display in the monitor as follow : MOD TV LUD 001 SWF POP DISC 11:08 SKIP MOD AF VOL- SEL VOL+ TA Touch it to select the other item . TV LUD 001 SWF POP DISC 11:08 SWF LUD DSP CLK SEARCH FINE+ FINE- Touch it to select the other item . Other Main Operation TV LUD 001 SWF - The numeric button (0-9) allow you to select the corresponding channel directly. 11:08 POP DISC Note: In TV mode, the +10 button is not available. 0 6 1 7 2 8 3 9 4 5 SKIP Fine Tuning FINE+ FINE- Touch it for previous . Touch the "fine+/fine- " section on the touch screen (or press / button on the remote) to fine tune the current channel . Channel ADD/DEL TV LUD 001 SWF POP DISC 11:08 SKIP MOD AF VOL- SEL VOL+ TA In TV mode , after search channel automatically, when you want delete the no sign channel, touch the SKIP section on the touch screen (or press the SKIP button on the remote , the screen display SKIP), the channel will be deleted. Also, you can touch or press numeric button to select channel, then press SKIP to add channel (the screen display SAVE). SKIP Auto searching TV channels SEARCH Dub system PAL system contain PAL(DK, I, BG, MN) dub tone functions, and for SECAM system is with SECAM DK dub tone functions . Briefly Touch the SEL section on touch screen (or press SEL knob on panel) to select the TV standard by repeatedly touch SEL section. [. . . ]