User manual BOSS BV11.2BA

[. . . ] Use Authorized Service Center Do not attempt to disassemble or adjust this precision product. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Washing the Car Do not expose the product to water or excessive moisture. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. [. . . ] Disc Slot Eject Button front panel or VOLUME +/- buttons on the remote control clockwise or counterclockwise, it is possible to adjust the desired sound quality. LOUDNESS Press and hold BND/LOUD button on the front panel for several seconds or press LOUD button on the remote control to reinforce the bass output. Press BND/LOUD button on the front panel for several seconds again or press LOUD button on the remote control again to release this function. SET THE CLOCK Press the DSP button on the front panel, the clock is shown on the LCD display. Then press SEL button on the front panel or on the remote control shortly, the hour will be flashing. Then pressing the VOL+/- buttons on the front panel or VOLUME +/- button on the remote control to change hours. Then you can change the minutes according to the operation described above. MUTE Press MUTE button on the front panel or MUTE button on the remote control to mute down the sound instantly. Volume Level Adjustment Pressing VOL+/- buttons on the front panel or VOLUME +/- on the remote control to increase or decrease the volume level. EQUALIZATION Press EQ button shortly to turn on equalization function and to select desired audio mode. There are four kinds of mode as below: FLAT CLAS POP ROCK EJECTING A DISC Press (EJECT) button on the DVD unit or on the remote control to eject the disc. Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follows. DVD: Normal Playback SF1/7 SF1/2 SF1/6 SF1/3 SF1/5 SF1/4 BASIC PLAY OPERATION Stopping Playback - Briefly press (Stop) button to pre-stop the unit playback, when button on the front panel or (Play) button on the remote control is pressed, normal playback will continue. 16 In slow motion state, press on the remote control or on the DVD unit to recover normal playback. Skipping Track Press / buttons on the remote control or T-UP/T-DN buttons on the front panel during playback. to or T-UP to skip to the next Press or T-DN to skip to the track, and press previous track. Note: For some VCD2. 0 discs (PBC/ buttons or Tplayback control), UP/T-DN buttons may be unavailable. DVD VIDEO MENU PLAY When playing a DVD disc in the DVD player: 1) The disc will be played automatically and stop at menu picture. 2) Use / , / cursor buttons to move between the highlight bars in the menu. MENU FUNCTION Press the MENU button on the remote control during DVD mode will return to the menu stored in the current disc. ADVANCED OPERATION REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEAT button on the remote control or RPT button on the DVD unit repeatedly to select different repeat modes. 2) For different kinds of disc, pressing REPEAT/RPT button has different effects. For DVD: REP:[OFF] REP:[CHAPTER] REP:[TITLE] BOOKMARK, A-B, PROGRAM and GOTO functions are unavailable. [. . . ] For details, please refer to the description of Music page above. SETUP In DVD mode, when the disc is playing or in the stop mode, press SETUP on the remote control to enter setup menu. · When the cursor is on the topside, use / buttons to move between the different pages. · Press button to move the cursor to the setup page below and then you can use / buttons to move between the different setup options. · Press button to display the choice list for each setup option and then use / buttons and OK button to change your selection. [. . . ]