User manual BOSS 738BI

[. . . ] CONTENTS LIST PAGE CONTENTS 2 3 4 6 7 8 9 10 11 12 13 16 17 18 20 22 23 25 37 38 39 NOTE OF DISCS ACCESSORY INCLUDED INSTALLATION DETACHABLE CONTROL PANEL WIRING DIAGRAM CONTROL PANEL FUNCTION BASIC OPERATIONS MENU OPERATION AUDIO OPERATION TUNER OPERATION CD /MP3/WMA OPERATION USB OPERATION MEMORY CARD OPERATION MUSIC FILES COPYING / TRANSFERRING MUSIC FILES TRANSFERRING FILES MANAGER iPod OPERATION BLUETOOTH HAND FREE OPERATION REMOTE FUNCTION SPECIFICATIONS TROUBLE SHOOTING 1 1. NOTE OF DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. [. . . ] The audio will remain recording by the unit system even MUTE function is activated The Transferring will automatically stop if the storage device memory is less than 2MB To Cancel Transferring. The LCD will display The music file that has been transferred incompletely will be deleted. The unit will stop the file transfer automatically under the following operation, the music file that has been transferred incompletely will be deleted. 1)Switch the power to off mode 2)Mode change 3)Inserting a CD Disc 4)Inserting a USB Stick 18 TRANSFER MP3 OR WMA MUSIC FILES BETWEEN MEDIA DEVICES Select a device by mode button and playback the music file need to be transfer: 1. Long press the COPY button to activate the transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. 3. Once selected the storage media, Press the AUDIO button as confirmation to transfer the Playing file. If no further button is press within a 10 second time out, the unit will automatically resume to the previous mode. 4. If the unit detect the selected media memory capacity is used up, will be displayed on the LCD for a while then automatically resume to the previous mode. 5. After pressing AUDIO button to start the transfer, the playing music file will stop and the transferring will start at the same time. (The following step is an example of if selected USB) 6. Under transfer is processing, the LCD will display . 7. When the file transfer is completed, the LCD will display for a while and automatically playback the present music file which have been transferred. The transferred Music file is automatically saved as a file into the Folder "MY_MP3 " or "MY_WMA" by the advance "File Management. " system of this unit. Tips For more details information of File Management system of this unit , Please see "FILE MANAGER''. Under transferring mode, All the MP3/WMA operation is not functional, like file up / down, Repeat, Random, and Intro etc. The audio will remain recording by the unit system even MUTE function is activated The Transferring will automatically stop if the storage device memory is less than 2MB WARNING: 1) Never remove the USB Stick while recording or file transferring to USB Stick. It may damage the USB Stick and sometimes will caused the unit system lock up. 2) It is not recommended to insert USB stick while recording is under progress to other storage device. Always remember to stop the recording or after the recording is completed, then insert the USB stick. 4) Do not turn off the Power of the unit during the File Transferring. 5) Do not switch the ignition key off during the File Transferring 19 15. MUSIC FILES ERASING You can erase files from the USB Stick or Memory Card Please read below for the details operation of this function: ERASABLE MEDIA USB Stick and Memory Card. ERASING MUSIC FILES ON THE MEDIA There are THREE different methods for erasing files; 1. Erase while the Music File is playing. [. . . ] When mode change to BT AUDIO mode, some of the audio device may auto playback the music without operate the music playback operation and some of the device like mobile phone may need to first change into the 'Media Player' mode on the mobile phone otherwise the song cannot be direct playback via Bluetooth wireless. If the auto playback not support on the audio device then please refer to the instruction manual of the audio device on how to operate music playback via Bluetooth wireless technology. Operating an audio device with this unit AVRCP ( Audio Video Remote Control Profile ) This unit can perform the following operations with the connecting Audio device which supports AVRCP (Audio Video Remote Control Profile) & only if the Audio device does support AVRCP . (1) Start playing - Every time when user change mode into "BT AUDIO" mode, this unit will automatically send a "PLAY" command via AVRCP to the audio device to command the auto start playing song in the audio device. 35 The PLAY command may differs depending on the Audio device. If the Audio device is not able auto start playing song after changed mode into "BT AUDIO" mode, user may need to operate the PLAY mode on the audio device to start the song playback. [. . . ]