User manual BOSE RC-35S2

[. . . ] Do not recharge, disassemble, heat above 100ºC (212ºF), or incinerate. Please dispose of used batteries properly, following any local regulations. Do not incinerate. For RC-35S2-27 remotes in Canada only This Category II radio communication device complies with Industry Canada Standard RSS-310. For RC-35S2-27 remotes in the U. S. and Canada NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] If the expansion product is also set to room B, you do not need to do anything. To change the remote control room code, see "Changing the room code" on page 8. To change the room code in the expansion product, see the owner's guide that came with it. Make sure the house code in the RC-35S2 remote is the same as in your LIFESTYLE® V25/V35 home entertainment system. Both products are initially set to house code 15 and should work together unless the house code in your main system was changed. To change the house code on the RC-35S2, see "Changing the house code" on page 9. Note: For more information on changing the house code, see "Adding Sound to Another Room" in the operating guide for your LIFESTYLE® system. Installing the remote batteries 1. Press and slide the battery cover off the back of the remote. Four AAA (IEC LR3) batteries 2. Install the four supplied batteries, matching the polarity markings (+ and ­) on the batteries to the markings inside the battery compartment. Slide the battery cover back into place until it snaps closed. 3 TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English USING THE REMOTE The RC-35S2 remote offers a simple set of controls that allow you to select sources and adjust audio playback in your expansion room. 2 PARTY 5 6 Links all connected expansion products to the source playing on your LIFESTYLE® system in the main room. Can be used during a party when the same music is desired in multiple rooms. 4 7 4 English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 USING THE REMOTE 3 Source selection Using the RC-35S2 remote, you can select any device set up to work with your LIFESTYLE® system. Note: To select any source other than AM/FM radio or an iPod, the source must be powered on. Selects sources configured for TV viewing, such as a broadcast tuner in your TV and/or any set top boxes connected to the control console. Press again to toggle between FM and AM when the radio is on. Selects disc devices connected to the control console, such as DVD, Blu-ray DiscTM, and CD players. Selects your iPod (if docked), other digital media players, or game consoles connected to the control console, as well as the last selected local source in the expansion room. Note: A local source is a device, such as a TV or a portable CD or MP3 player, that is connected directly to audio input connectors on the expansion product. iPod is a trademark of Apple, Inc. , registered in the U. S. All other marks are registered trademarks and trademarks of Bose Corporation. 5 TAB 8 USING THE REMOTE TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English 4 Playback controls The playback controls allow you to operate devices connected to your LIFESTYLE® system such as a DVR, DVD/CD player, and docked iPod. Begins playback of DVR, CD/DVD, or iPod Skips to previous track or radio station Pauses playback of DVR, CD/DVD, or iPod Skips to next track or radio station 5 Volume controls + Raises the volume and unmutes the system (if muted). ­ Lowers the volume. Mutes/unmutes expansion room speakers. Press and hold to mute/unmute speakers in all rooms. Stops playback of DVR, CD/DVD, or iPod 6 English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 USING THE REMOTE 6 Channel controls Changes to next/previous TV channel or radio preset. If the source in use by the control console is a cable or satellite box connected to your TV, this moves to the next/previous cable or satellite channel. [. . . ] Slide the battery cover back into place until it snaps closed. Changing the house code The radio frequency (RF) signals used in expansion systems have a long range and the ability to penetrate walls. Therefore, the signals from an RC-35S2 remote in one home can possibly reach and affect the operation of a LIFESTYLE® system in a nearby home. Changing the house code for the system and all the remotes used with it avoids possible conflict. To change the house code in your RC-35S2 remote and in your LIFESTYLE® system: 1. [. . . ]