User manual BOSE CONTROLSPACE SURROUND SOUND INPUT CARD

[. . . ] ControlSpace® Surround Sound Input Card Installation should only be performed by trained service personnel. 1. [. . . ] When the connector on the card is aligned above the connector on the motherboard, press gently to mate the connectors. Plug in the power supply and turn on the ESP-88. Figure 1 Figure 2 CAUTION: ESD sensitive device. NOTE: For compliance with EMC regulations, only one Surround Sound card may be added per ESP-88. 7. Use the ControlSpace® DesignerTM software to verify the card was inserted correctly: a) Press scan and confirm that the software detects the card. b) If the card was installed correctly, right-clicking the ESP-88 and displaying its properties will show Surround in the correct slot in the ESP-88. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. This product contains one or more programs protected under international and U. S. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. [. . . ] Be sure that the card is completely pushed into the connector, and that the card is properly aligned in the chassis. For installation instructions in other languages, please visit pro. Bose. com. ©2008 Bose Corporation, The Mountain Framingham, MA 01701-9168 USA AM312940 Rev. 03 pro. Bose. com [. . . ]